piotrmikula
join:2009-05-02 | reply to dgilbert
Re: [netopia] Need some help configuaring Netopia 3347 with stat
do I need to use the telnet + tftp to upload the new firmware or can I accomplish the same from the web interface under INSTALL SOFTWARE section? |
|
dgilbert
Good Bye My Friend
Premium,MVM
join:2002-06-15
none
clubs: | reply to piotrmikula
that must be one of the crippled firmwares. not sure if you can "downgrade" it or not.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine! |
|
piotrmikula
join:2009-05-02
| reply to dgilbert
from this output on the home page
Hardware Netopia Model 3347-02 AnnexA High-Power Wireless DSL Ethernet Managed Switch
Serial Number 32683156
Software Version 7.6.1r7 BreakWater Firewall SilentRunning
Product ID 1225
Date & Time 5/3/09 12:18:16 AM Safe Harbour On
firmware version I have is I guess 7.6.1r7 right?
now I can only download the 7.5.0 R1 from here
»www.netopia.com/equipment/upgrad···el.html#
isn't it gonna mess things up? Or how do I download the firmware from the modem to my PC and then upload it back onto the modem?
thanks David |
|
dgilbert
Good Bye My Friend
Premium,MVM
join:2002-06-15
none
clubs:
| reply to piotrmikula
»Cayman Routers »[BellSouth] How do I configure my Cayman for 5 Static IPs?
i dunno why you don't have expert mode though, have you tried updating the firmware? even if it is the same version, sometimes it will fix missing links.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine! |
|
piotrmikula
join:2009-05-02
| [netopia] Need some help configuaring Netopia 3347 with static I
My model is Netopia-3000 Netopia Model 3347-02 AnnexA High-Power Wireless DSL Ethernet Managed 4 port Switch. Software: 7.6.1r7
I have a static (sticky) IP range from ATT
NETWORK xx.xx.xxx.160
RANGE xx.xxx.xxx.161-65
DG xx.xx.xxx.166
BCAST xx.xx.xxx.167
SM 255.255.255.248
How do I configure the device (NAT) so I can use multiple IPs on the network so I can have .162 for my webserver and 163 for my mail server. Right now all traffic shows it's coming from .166 (the Default Gateway)
I also noticed that I don't have the Expert Mode in the web interface. Is that needed? Do I need to upgrade the firmware to Ent Firmware?
My model seems to be the non ENT version?
Peter |
|
