http://www.dslreports.com/forum/r22330646 en Wed, 09 Dec 2009 17:05:17 EDT Wed, 09 Dec 2009 17:05:17 EDT http://www.dslreports.com/forum/remark,22330758 piotrmikula : do I need to use the telnet + tftp to upload the new firmware or can I accomplish the same from the web interface under INSTALL SOFTWARE section?]]> http://www.dslreports.com/forum/remark,22330758 Sat, 02 May 2009 20:37:58 EDT http://www.dslreports.com/forum/remark,22330730 dgilbert : that must be one of the crippled firmwares. not sure if you can "downgrade" it or not.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!]]> http://www.dslreports.com/forum/remark,22330730 Sat, 02 May 2009 20:28:18 EDT http://www.dslreports.com/forum/remark,22330703 piotrmikula : from this output on the home page

Hardware Netopia Model 3347-02 AnnexA High-Power Wireless DSL Ethernet Managed Switch
Serial Number 32683156
Software Version 7.6.1r7 BreakWater Firewall SilentRunning
Product ID 1225
Date & Time 5/3/09 12:18:16 AM Safe Harbour On

firmware version I have is I guess 7.6.1r7 right?

now I can only download the 7.5.0 R1 from here

»www.netopia.com/equipment/upgrad···el.html#

isn't it gonna mess things up? Or how do I download the firmware from the modem to my PC and then upload it back onto the modem?

thanks David]]> http://www.dslreports.com/forum/remark,22330703 Sat, 02 May 2009 20:20:21 EDT http://www.dslreports.com/forum/remark,22330675 dgilbert : »Cayman Routers »[BellSouth] How do I configure my Cayman for 5 Static IPs?

i dunno why you don't have expert mode though, have you tried updating the firmware? even if it is the same version, sometimes it will fix missing links.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!]]> http://www.dslreports.com/forum/remark,22330675 Sat, 02 May 2009 20:12:34 EDT http://www.dslreports.com/forum/remark,22330646 piotrmikula : My model is Netopia-3000 Netopia Model 3347-02 AnnexA High-Power Wireless DSL Ethernet Managed 4 port Switch. Software: 7.6.1r7

I have a static (sticky) IP range from ATT

NETWORK xx.xx.xxx.160
RANGE xx.xxx.xxx.161-65
DG xx.xx.xxx.166
BCAST xx.xx.xxx.167
SM 255.255.255.248

How do I configure the device (NAT) so I can use multiple IPs on the network so I can have .162 for my webserver and 163 for my mail server. Right now all traffic shows it's coming from .166 (the Default Gateway)

I also noticed that I don't have the Expert Mode in the web interface. Is that needed? Do I need to upgrade the firmware to Ent Firmware?

My model seems to be the non ENT version?

Peter]]> http://www.dslreports.com/forum/remark,22330646 Sat, 02 May 2009 20:04:35 EDT