| reply to JamesLevinworth
Re: Client that actually works with RV016? IPSec, PPTP, and L2TP are enabled on the RV016. IPSec and PPTP are enabled on my DI-624 at home (L2TP isn't an option).
Logs on the RV016 show the setup completes. Log.txt on the client shows "tunnel is connected successfully" and then "verifying network" - nothing after that.
I'll upgrade the RV016 firmware during the PM window this week.
I've got tcpview but had not considered using it - will see what it says. I'll also check into the MTU settings on the DI-624 but I don't think I have much control on the DSL modem itself (Motorola 2210-02-1002). |
|
| No worries on L2TP - Not needed for this and can be disabled if you wish on the RV016.
Definitely check on the MTU - Should be under the WAN section on your DI router. Even if not this issue, it should be set appropriately per the instructions in the FAQ.
Thanks for the detailed updates. Keep me posted. |
|
