Re: "Use default Remote Gateway" Configuring Routing

Author	All Replies
Matt Take me down to the paradise city Premium join:2003-07-20 Jamestown, NC	reply to johnpsph Re: "Use default Remote Gateway" Configuring Routing So change one of them to 192.168.2.x?
	to forum · permalink · · 2009-05-03 20:49:34 ·
johnpsph join:2003-11-16 Saint Louis, MO	Sorry, I could have been much more clear: the router's VPN settings will not ALLOW me to change the "Remote IP range" from 192.168.1.x. Is there something that I can try from the client side?
johnpsph join:2003-11-16 Saint Louis, MO	to forum · permalink · · 2009-05-03 21:31:58 ·
Matt Take me down to the paradise city Premium join:2003-07-20 Jamestown, NC ·North State Commun..	said by johnpsph : Sorry, I could have been much more clear: the router's VPN settings will not ALLOW me to change the "Remote IP range" from 192.168.1.x. Is there something that I can try from the client side? You have to change the entire subnet of the VPN router. You probably need to do this on the setup tab or something? You either need to change the entire remote subnet from 192.168.1.x or you need your change your client subnet from 192.168.1.x. On a D-Link I have, you can do this on Setup -> Network Settings -> Router IP Address
	to forum · permalink · · 2009-05-04 09:18:44 ·
jazzman916 Life on the Upbeat Premium,Mod join:2001-09-01 Birdland clubs:	(topic move) "Use default Remote Gateway" Configuring Routing Moderator Action The post that was here, has been moved to a new topic .. »"Use default Remote Gateway" Configuring Routing
	to forum · permalink · · 2009-05-04 20:09:41 · (locked)


Friday, 04-Dec 10:57:34	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF