Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to nekrekab8
Re: [Home Networking] Not sure how to proceed - help!
What do your DSL Stats look like? The Attenuation, SNR and Sync Rate in Kbps needs to be copied from the ZyXEL and posted.
Set DNS IPs in the ZyXEL Router to 4.2.2.1 and 4.2.2.2 (Primary and Secondary) on the DHCP page to fix DNS issues. This will update any PCs connected to the ZyXEL using a Switch (not a Router - blocks traffic) if they are set as DHCP clients.
You would need to work with Tier 3 support (aka TRON or Vendor Relations) about packet loss that extreme.
You can also try asking for help in the Covad Direct Forum as they can monitor the line and then make recommendations based on what they see.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
nekrekab8
join:2006-10-19
Menlo Park, CA
| I've got the ZyXEL in gateway mode as I've got a home network set up, so I don't have direct access to those stats. If you can tell me how to get to those, I'll work on it.
Since I've got an internal DHCP, I can set up that with those IPs, yes?
Thanks for the link to the Covad people. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
1 edit | Gateway Mode (aka Router Mode) means it is handling the DHCP, the Routing and the PPPoE session or are you meaning to say that you have it in Bridge Mode? Are you using another Router behind the ZyXEL Router/Modem?
»EarthLink DSL FAQ »What type of DSL modem does Earthlink provide?
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
nekrekab8
join:2006-10-19
Menlo Park, CA | Sorry, you're right. Bridge mode. Got my terms crossed. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| What Brand/Model Router are you using behind the ZyXEL?
To get the DSL Stats from the ZyXEL you would temporarily hook one PC directly to the ZyXEL and try to access the Web Interface. If it does not respond, then it would need to be reset to enable the Web Interface. Once you have the DSL Stats, then you would place the ZyXEL back into Bridge Mode and hook the Router back up to the Modem.
»EarthLink DSL FAQ »HowTo obtain DSL Stats & Diagnostic Info from the ZyXEL P-660R-ELNK Router?
»EarthLink DSL FAQ »ZyXEL P-660R-D1 - How to Log on to the Modem Main Page (To obtain DSL Stats)
»EarthLink DSL FAQ »HowTo setup a Zyxel P-660R-ELNK in Bridge Mode to use a Router or PPPoE client?
»EarthLink DSL FAQ »ZyXEL P-660R-D1 - How to Set the Modem to Bridge Mode
»EarthLink DSL FAQ »Zyxel P-660R-ELNK and Zyxel P-660R-D1 Router Details
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
