site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Share Topic
Posting?
Post a:
Post a:
Links: ·Forum Guidelines ·CenturyLink FAQ ·CenturyLink Monitors ·CenturyLink Reviews ·CenturyTel Reviews
AuthorAll Replies

roady89

join:2009-05-09
Kaufman, TX

reply to McSummation

Re: [DSL] Embarq Modems

said by McSummation:

1) What is the make and model of the modem you have?
2) Can you post statistics from the modem that shows SNR, allowed speed, etc.?
3) Try a speed test from »helpme.att.net/dsl/speedtest/ and pick the Dallas site. The sites you picked were all too far away to be reliable.
1.Zyxel EQ660R

2. Not sure EXACTLY what you need to know but I can try and post anything you need. Heres some stuff I found from modem diagnostics.
Upstream Noise Margin
noise margin upstream: 1 db
output power downstream: 20 db
attenuation upstream: 31 db

Downstream Noise Margin
noise margin downstream: 24 db
output power upstream: 12 db
attenuation downstream: 49 db

3. I ran the speed test. The little arrow points to 128K. We are supposed to get 512K but I know we can because we are so far out of town.
Download = 487.29 kbps
Upload = 245.21 kbps


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

said by roady89:

2. Not sure EXACTLY what you need to know but I can try and post anything you need. Heres some stuff I found from modem diagnostics.
Upstream Noise Margin
noise margin upstream: 1 db
output power downstream: 20 db
attenuation upstream: 31 db

Downstream Noise Margin
noise margin downstream: 24 db
output power upstream: 12 db
attenuation downstream: 49 db

Your line looks like it can handle at least the 1.5 Mbps service. 3.0 Mbps would be pushing it, but 1.5 Mbps should be stable.

• For 3 Mbps DSL the Downstream Attenuation must be under 48 dB with 10 dB SNR or better.

• For 6 Mbps DSL the Downstream Attenuation must be under 38 dB with 10-12 dB SNR or better.

What is missing is your Sync Rates.

There will the WAN Stats that show Upstream and Downstream Sync Rates in Kbps, possibly in a pop up window after clicking a button for WAN Statistics.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

roady89

join:2009-05-09
Kaufman, TX

System up Time: 161:17:20
CPU Load: 0.36%

WAN Port Statistics:
Link Status: Up
Upstream Speed: 287 kbps
Downstream Speed: 571 kbps



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

said by roady89:

System up Time: 161:17:20
CPU Load: 0.36%

WAN Port Statistics:
Link Status: Up
Upstream Speed: 287 kbps
Downstream Speed: 571 kbps

Right now you are on the 0.5 Mbps Service aka 571/287 Sync Rate that should usually show 512/256 speed test results.

I would call in and asked to be placed on the 1.5 Mbps service and see what the Downstream SNR stabilizes at. The Attenuation should remain the same as it is a measurement of the lines electrical distance.

HTH
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

Thursday, 31-May 14:58:29 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.
Most commented news this week
Hot Topics