dimas
join:2009-05-04
indonesia
1 edit | reply to Doctor Olds
Re: how to connect speed stream 5100a in indonesia? I'm sorry this is what i see when i enter to web interface, (on attachments). I'm so sorry that i missed, is not UP but NOT TRAINED. VPI/VCI pair in my country is :
1/32
0/33
0/35
0/100
8/35
8/48
0/38 |
|
 Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
1 edit | What is the DSL LED doing? If the DSL LED is not solid green, then they have not installed the DSL yet. Not Trained means the Modem does not see any DSL Signal.
|
|
 wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | reply to dimas
One other thing to consider........
The 5100a must have the dsl signal on the inner pair of the phone wiring
If the DSL signal is on the outer pair of the phone wiring that needs to be corrected
Switching inner and outer wire pairs on an RJ-11 wall plate |
|
dimas
join:2009-05-04
indonesia
1 edit | reply to Doctor Olds
Yes when i plug-in the DSL cable the dsl light is steady green then i look at the summary page and the atm circuit is all up.
And please tell me how to setting up the TCP IP after this, DNS SERVER in here they are using 203.130.xxx.xxx.
Here is the summary of my friend dsl modem, he's using TP_LINK.
How to config the TCP IP seting? |
|
Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18 | You need your setup info from the ISP. I have no idea if they use Static IPs or DHCP IPs. The 5100a is a Bridge and doesn't have a Router so it only supports one (1) PC. You put your ISP setting into your PCs Ethernet Adapter TCP/IP settings page.
Select your LAN - Ethernet Adapter
Under TCP-IP Properties, either leaving all fields blank for DHCP DSL or fill in IPs supplied by your ISP for your account.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
dimas
join:2009-05-04
indonesia
1 edit | My friends told me that my ISP is using 192.168.1.1, so what does it means? and where i put this value?
PS. I forgot, i've try to connect without fill any value on TCP IP Setting and fail. |
|
Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18 | I would say that your friends are just wild guessing and don't really know since 192.168.1.1 is a Private IP that does not route out on the Internet as it is reserved for Home Networks and Private LAN Use.
Call your ISP and get the info, after all you are paying them for service and support. Get your monies worth.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
|
|
dimas
join:2009-05-04
indonesia | OK thank you Doctor Olds and all..... |
|
dimas
join:2009-05-04
indonesia | Thanks Doctor Olds, wayjac and graysonf. Now i can use this modem. Just using new connection and choose PPOE connection and fill the username and password after those all it's working. Special thanks to Doctor Olds. |
|
