[Equipment] Teleblend and Meucci Solutions

Forums » VOIP etc » Voice Over IP - VOIP » Teleblend » [Equipment] Teleblend and Meucci Solutions


Uniqs: 753	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·ALL ·Review Your VoIP Provider ·VoIP Providers ·VoIP FAQ ·Porting Rules ·What Codec?

wesj join:2009-02-07 New York, NY	[Equipment] Teleblend and Meucci Solutions Starting two days ago I am received numerous calls with no phone listed and under the name Meucci Solutions. Contacted Teleblend and they said file a complaint with Meucci Solutions who replied contact Teleblend. There are other posts of other voips having this problem. Has any other Teleblend user had this problem and does anyone know the solution?
	permalink · 2009-05-15 14:40:03 ·

ChuckIL9 join:2005-11-07 Peoria, IL	Re: [Equipment] Teleblend and Meucci Solutions There was a similar problem last month affecting other providers: »Meucci Solutions
	permalink · 2009-05-15 17:52:54 ·

iavianbird join:2009-07-28 West Roxbury, MA	From 27th evening EST 4:30pm onwards every 20mins [almost] receiving calls from Meucci solutions as out of area with no number and all are blank calls. They are not getting registered in the incomming calls or missed calls in teleblend site. Its horrible and dont know how to stop them. Please post if any one finds a soluton for this,
	permalink · 2009-07-28 00:29:06 ·

dcurrey
Premium
join:2004-06-29

·ViaTalk

A couple of things.

1. Your ata needs to be behind the router. Without being in the routers DMZ. You may need to forward ports for this to work.

2. Pap2 type devices have a setting to ignore calls that do not come for the sip server. (Restrict Source IP)

3. Grandstream ata setting to do the same as pap2. May require firmware update.

4. Move sip off port 5060

With teleblend the only option I think you have is 1. You have locked ATAs. Not sure what they furnish or if you are using an old Sunrocket ata. Anyfirmware or config changes have to be done by Teleblend.

Follow the links above for more info on this. Think they cover the above ideas and a couple more.

permalink · 2009-07-28 09:37:56 · Print ·

TBSupport1 join:2007-09-11 Leesburg, VA	Re: [Equipment] Teleblend and Meucci Solutions We can also move you off of port 5060 as well. Just PM your ticket number and I will take a look and get you setup.
	permalink · 2009-07-31 09:53:39 ·

voiplover Premium join:2004-05-28 Portsmouth, NH	Try changing your IP address. If you can, it should solve your problem.
	permalink · 2009-08-02 16:39:43 ·

dcurrey Premium join:2004-06-29	Re: [Equipment] Teleblend and Meucci Solutions That would only stop it until the ata was scanned again.
	permalink · 2009-08-02 17:15:15 ·

voiplover Premium join:2004-05-28 Portsmouth, NH ·callwithus ·Axvoice	Re: [Equipment] Teleblend and Meucci Solutions Ya well, it's believed that they are capturing IP addresses by posting info or adds about voip. Then doing a sip to sip call to those IP addresses. If you change your IP address and don't go to there site then the calls should stop. Plain and simple cure.
	permalink · 2009-08-02 19:22:59 ·

your comment..

Forums » VOIP etc » Voice Over IP - VOIP » Teleblend


Tuesday, 01-Dec 03:06:41	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF

[Equipment] Teleblend and Meucci Solutions

Re: [Equipment] Teleblend and Meucci Solutions

Re: [Equipment] Teleblend and Meucci Solutions

Re: [Equipment] Teleblend and Meucci Solutions

Re: [Equipment] Teleblend and Meucci Solutions