Siemens SE5940 Router

Forums » Equipment Support » Hardware By Brand » Efficient » Siemens SE5940 Router


Uniqs: 487	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·FAQ-Efficient Forum ·5260 to 5660 FAQ ·Tweaks ·DrTCP ·Efficient Networks Website ·Common Application Ports

5930 and NAT tables »

cedwistv

@charter.com

There was a posting about a year ago that I read that is exactly what I am running into on this very same subject. It is still out there to review. Near the end of the replys someone sent some information to the poster and that seems to have fixed the issue. I would like to know what that was so I too can get access into my SE5940 router. There is no console cable but if I knew the pinout I would make one. The UI does not respond on the LAN ports with the default IP address and the reset button does not reset the LAN IP thus I cannot get in the unit to do any configuration...
HELP!! Thanks!

permalink · 2009-05-15 14:47:13 · Print ·

adsldude always learning Premium,Ex-Mod 2003-9 join:2000-11-10 Colorado	Re: Siemens SE5940 Router »Siemens SE5940 Router »Re: Uknown SpeedStream 5961 good luck!
	permalink · 2009-05-15 18:08:24 ·

cedwistv @charter.com	Re: Siemens SE5940 Router I think you may have even provided the answer the the first time to the first guy who asked? I just went and bought a Cisco 2600 and a WIC-1DSU-T1 card for under $100....maybe I can get that one to respond... Thanks for the good luck!
	permalink · 2009-05-15 18:14:20 ·

your comment..

Forums » Equipment Support » Hardware By Brand » Efficient	5930 and NAT tables »


Thursday, 10-Dec 02:15:53	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF

Siemens SE5940 Router

Re: Siemens SE5940 Router

Re: Siemens SE5940 Router