how-to block ads
|
bolky21
join:2007-02-06
Corona, CA
1 edit | Replace 3xT1 Looking to lower cost. We currently have a 3xT1 and would like to keep at least our current bandwidth if not more and cheaper than what we currently pay.
1441 S Carlos Ave
Ontario, CA 91761
909-947-xxxx | |
|  voice_data
join:2006-02-25 | Re: Replace 3xT1 3xT1 (4.5M) = $960 per month
4xT1 (6.0M) = $1,221 per month
5xT1 (7.5M) = $1,483 per month
Full DS3 @ 45M = $3,133 per month
Please contact me directly for more info:
telebroker(at)gmail.com
1-877-993-2804 | |
| | bolky21
join:2007-02-06
Corona, CA
| Re: Replace 3xT1 said by voice_data  :3xT1 (4.5M) = $960 per month 4xT1 (6.0M) = $1,221 per month 5xT1 (7.5M) = $1,483 per month Full DS3 @ 45M = $3,133 per month Please contact me directly for more info: telebroker(at)gmail.com 1-877-993-2804 Does this include a router lease and any line monitoring? What is the SLA? | |
| 
LBDSL
Lightning Bolt
VIP
join:2002-01-07
Auburn Hills, MI
| 3xT1 (4.5M) = $899.95 per month with a 1 year term
4xT1 (6.0M) = $1,249 per month with a 1 year term
Further discounts on 2 or 3 year terms
Installation:
3xT1 (4.5M) $350 (through 6/30/09)
4xT1 (6.0M) $450 (through 6/30/09)
Free Managed router
SLA: »lbdsl.com/sla-v4.pdf
Let me know if you have any questions.
Brent
--
Lightning Bolt Technologies | |
| | bolky21
join:2007-02-06
Corona, CA
| Re: Replace 3xT1 said by LBDSL :3xT1 (4.5M) = $899.95 per month with a 1 year term 4xT1 (6.0M) = $1,249 per month with a 1 year term Further discounts on 2 or 3 year terms Installation: 3xT1 (4.5M) $350 (through 6/30/09) 4xT1 (6.0M) $450 (through 6/30/09) Free Managed router SLA: » lbdsl.com/sla-v4.pdfLet me know if you have any questions. Brent Does this price include line monitoring? | |
| | |
LBDSL
Lightning Bolt
VIP
join:2002-01-07
Auburn Hills, MI
| Re: Replace 3xT1 What type of line monitoring are you looking for? We do not actively watch every circuit 24/7/365, however if there is some issue that you are reporting, we can certainly watch the line, and monitor it for issues.
Brent
--
Lightning Bolt Technologies | |
| | | | bolky21
join:2007-02-06
Corona, CA
1 edit | Re: Replace 3xT1 said by LBDSL :What type of line monitoring are you looking for? We do not actively watch every circuit 24/7/365, however if there is some issue that you are reporting, we can certainly watch the line, and monitor it for issues. Brent Something that monitors if the circuit goes down and to alert us that it is down and also have the ISP start working on a resolution. What we want is our ISP to be proactive not reactive when the circuit goes down. Our current ISP will start diagnosing the problem usually before we know the circuit went down. | |
| | | | |
LBDSL
Lightning Bolt
VIP
join:2002-01-07
Auburn Hills, MI
| Re: Replace 3xT1 That isn't something we do, and I'll tell you why. If we did, and saw the circuit go down (Hard down), we still need to talk with someone on site, before we can really do any GOOD troubleshooting. We need to check basic things on site fist. A good example, would be power. What if your location losses power at 2am, we start working it, and get the ILEC out at 3am, only to find out your circuit is down because your building has no power. That is a ton of wasted time, and energy, all for something we have no control over.
So we depend on the user to report any problems, this way we can work together on a resolution.
--
Lightning Bolt Technologies | |
| | | | | | bolky21
join:2007-02-06
Corona, CA
| Re: Replace 3xT1 said by LBDSL :That isn't something we do, and I'll tell you why. If we did, and saw the circuit go down (Hard down), we still need to talk with someone on site, before we can really do any GOOD troubleshooting. We need to check basic things on site fist. A good example, would be power. What if your location losses power at 2am, we start working it, and get the ILEC out at 3am, only to find out your circuit is down because your building has no power. That is a ton of wasted time, and energy, all for something we have no control over. So we depend on the user to report any problems, this way we can work together on a resolution. Thanks for your honest response. However, I understand the possibility of equipment failure at our premise but we have had outages caused by bad equipment at the carrier's premise that was proactively repaired before we could report the outage. Because we had 24/7 monitoring we were notified about this outage and the steps being taken to resolve it. We would like the ISP to at least investigate up to a certain point in the network to find out where the circuit went down. We also get reports on latency. It is this type of monitoring that I was asking about. We are willing to pay a premium for this type of service. | |
| | | | | | |
LBDSL
Lightning Bolt
VIP
join:2002-01-07
Auburn Hills, MI
| Re: Replace 3xT1 Not a problem at all, there are some carriers, and ISP's out there, that do offer what you are looking for. We did do this in the past, but it turned into to many false positive type issues, where we spent time and money trouble shooting a non-issue (power related, user turning CPE off, etc.) I hope you find what you are looking for.
--
Lightning Bolt Technologies | |
| | | | | 
RockyBB
Premium
join:2005-01-31
Longmont, CO
| said by bolky21 :Something that monitors if the circuit goes down and to alert us that it is down and also have the ISP start working on a resolution. What we want is our ISP to be proactive not reactive when the circuit goes down. Our current ISP will start diagnosing the problem usually before we know the circuit went down. AT&T and ACC Business do that with their internet services. they will not have no-profit pricing like you've seen so far. PM me if you would like me to run a quote for you. | |
| bolky21
join:2007-02-06
Corona, CA | Any other options available other than bonded T1's in our area? | |
| MetroT1
join:2006-02-08
Snellville, GA | It appears ethernet may be an option for you. I don't know that it will save you money though. It will probably get your more bandwidth for your money though.
Email me at jbarnes@shopfort1.com if interested. | |
| FreedomFire
join:2004-07-23
Chesapeake, VA
| Please submit your request for quote and requirements here....with any details you deem important in the comments section (e.g. application(s), # users, price range, timeline, router, line management, etc.):
»DS3-Bandwidth.com
Don't let the url fool you. We cover every bandwidth solution option including T1 (bonded/multiple, pt-pt, MPLS), DS3 (fractional, bonded, pt-pt, etc) OCx, metro ethernet (GigE etc), and fiber.
....we'll see what we can find for you comparing multiple Tier 1 and Top Tier 2 providers (over 30). We'll provide snap shot results immediately via email....and more detailed results as follow-up. We'll likely call to answer any questions you have ... and especially to go over all options that may lower your costs. We want to make sure you get the absolute best solution for you.
God Bless,
Michael Lemm
FreedomFire Communications
»DS3-Bandwidth.com
»www.linkedin.com/in/freedomfirecom | |
| 
viperm
Carpe Diem
Premium
join:2002-07-09
Winchester, CA
3 edits | Give us a call we should be able to hit you with one of our partners via wireless
Just as fast and reliable as a T-1 and we activaly monitor the circuit 24x7
Same type of SLA as a T-1 and faster response and install time as we can usually have it up and running within a couple days notice.
One of the major POPS is right there near you of centerlake north of the airport.
Martin m
Southern Cal Telephone company
951-693-1880 Ext 261
--
ComTrain Certified Tower Climber. American Tower Certified approved contractor. Wireless consultants. | |
| PAETECT1
join:2009-06-18
Mount Laurel, NJ | What is the best price and terms have you recieved so far. I'm with PAETEC and we also include free managed routers and SLA's. Please advise if you would like a quote. | |
| Corey L
join:2009-06-30
New York, NY | I can offer your a 10Mbps Ethernet Handoff for slightly under $1000 per month.
Please contact me directly for more info
C Laval
212-981-0098
corey.laval@xo.com | |
| | | |
|
