yolarry
join:2007-12-29
Creston, WV | reply to wa5sox1
Re: [HN7000S] New Software Release
I back to slow speed. bummer |
|
dbirdman
Premium,MVM
join:2003-07-07
Eureka, CA | reply to taylorb
You are welcome, from one Humboldt resident to another! |
|
taylorb
join:2007-06-16
Bridgeville, CA | reply to dbirdman
Thank you dbirdman! Really thanks that fixed my hnFAPmon, I could not figure out what happened; they rolled back my software too. |
|
grohgreg
Dunno. Ask The Chief
join:2001-07-05
Dawson Springs, KY
| reply to inthewoods
said by inthewoods  :SS still at 48-50. Sigh. Still with the low signal, huh? Contact me via site IM, and we'll exchange email addresses. I might be able to talk you through the loop resistivity test on your RX cable
//greg//
--
HN7000S/98cm Prodelin/2w Osiris/ProPlus - G16/1250H/Germantown - NAT 66.82.187.152/Gateway 66.82.25.10/DNS 66.82.4.12 and 66.82.4.8 - Firefox 3 - AV/Firewalled by NIS2009 |
|
inthewoods
join:2007-08-17
Live Oak, FL
| reply to wa5sox1
No transponder change,here. Throughout all the IA6 problems,
and whatever Sat change (Galaxy 25?) I've had two freq changes,
but none recently.
SS still at 48-50. Sigh. No rain fade. Just :/quit/:
I'm used to it , but it really gets tiresome when you need to
send large files to the clients.
(mumble, grumble, gripe) 
--
HN7000S/PRO Plan/93W - 1039/.74m dish/1 watt |
|
io chico
join:2003-12-30
Chico, CA | reply to wa5sox1
I'm glad I'm not going completely nuts. hnfapmon stopped working this morning, I checked for an update and found August 2008! |
|
laserfan
join:2005-01-14
Blanco, TX
| reply to wa5sox1
I'm rolled-back as of last night, too! Gotta change my sig again I guess!!!! First time this has happened in the 3 yrs I've been w/DW-then-HN; they must have been experiencing big-time problems with the firmware, but it's been "OK as usual" for me here...
--
HN7000S v5.8.0.49 Home Plan, G13/H1@127W, 1110MHz 33Msps, SigTyp 72, 10-20clients & 6+OSes |
|
Just Rachel
occasional optimist
Premium
join:2003-07-10
Mccloud, CA | reply to wa5sox1
I am now rolled back also, and, now at 117:W:1170 rather than 117:W:990. |
|
yolarry
join:2007-12-29
Creston, WV
2 edits | reply to inthewoods
My modem stop on its tracks last night and got downgrade...
so far so good. |
|
inthewoods
join:2007-08-17
Live Oak, FL | reply to wa5sox1
Yep, I got rolled back and a modem restart this AM.
"valid software reset" shows in the log.
I had a lot of weird problems a few days ago. Hope this cures it.
--
HN7000S/PRO Plan/93W - 1039/.74m dish/1 watt |
|
Just Rachel
occasional optimist
Premium
join:2003-07-10
Mccloud, CA | reply to wa5sox1
I haven't been rolled back, but, I shut everything down completely when not in use.
I haven't noticed any problems. What kinds of problems were/are y'all having with the newest software? |
|
Road Runner
join:2004-03-19
Morrilton, AR | reply to wa5sox1
I'm back to 5.6.1.35 after doing a reregistration. I had nothing but problems with the 5.8.0.49 firmware. |
|
DoctorDoom
Troll hunter
Premium
join:2006-09-19
Becket, MA | reply to wa5sox1
I just this moment was restored to 5.6.1.35. Hmmm....
--
HN7000S, Pro & PowerPak, G25 93.1°W 1278 |
|
dbirdman
Premium,MVM
join:2003-07-07
Eureka, CA | reply to dbirdman
If anyone wiped out their entries for hnFAPmon for the older versions, both 5.6.1.19 and 5.6.1.35 have a command number of 71. |
|
dbirdman
Premium,MVM
join:2003-07-07
Eureka, CA
1 edit | reply to tobicat
Several of my members at DatastormUsers are reporting the fallback to 5.6.1.35 (for HN7000S) or 5.6.1.19 (for DW7000).
My modem was on overnight, but the dish was not pointed at my assigned satellite. I repointed a short while ago, and the download began 4 minutes after lock and completed in about 2 minutes.
--
W2K Server|Toshiba Satellite XP Pro|iDirect 3100 on Datastorm 1.2 meter XF3 with 4-watt BUC|HughesNet G28/1070/7000s Pro on 2-watt Datastorm G74|Sprint Air Card|1990 Blue Bird Wanderlodge Bus "Blue Thunder"|Author of PC-OPI and DSSatTool |
|
tobicat
join:2005-04-18
Tombstone, AZ | reply to Raminto
My firmware did not change but my freq changed back from 999 to 990 in the middle of the night with no log entry.
Those guys are up to something.
--
9000 spaceway III, 7000S SatMex 5 990, Dlink wirless |
|
Raminto
join:2006-02-28
Whitehorse, YT | reply to wa5sox1
Same here. Mine switched back to 5.6.1.19 and there is not even an entry in the reset log file. |
|
wa5sox1
join:2007-07-09
Vanderwagen, NM
| reply to wa5sox1
Last night a reset. Back to 5.6.1.35 for now. Wouldn't it be nice to know what's going on? .. Perhaps too many people having problems with the new update..heck if I know..but system thus far is performing MUCH better with the old firmware.
____________________________________________________
----------------------
Entry Number 0:
----------------------
Time of Reset : FRI JUN 26 08:03:31 2009 [GMT]
Asserted at : t=tDownload /cm_data/pessd/rem2/sdl2/filecollection.cc#240:
Reset Type : Valid Software Reset
Reset Reason : New software downloaded. (Current Image: 5.8.0.49, New Image: 5.6.1.35)
--
G25(93W)/1247H-H/SOHO/.98 2Wt/Gateway 66.82.159.144 |
|
riteflyer
join:2009-06-02
Smithfield, KY
| reply to wa5sox1
Newbie here so please be patient. I too have experienced very slow connection speeds and speed tests. I am baffled by what is going on here when I pay so much for service. Having said this I have a HN7000s modem and have been with tech support several times to no avail. They have told me I have an open Port and it may be a virus causing this. So I will address that. The bottom line here is that we are not getting what we pay for for whatever reason. It could be that they are "throttling" or any other number of things. I don't think it is my equipment and if it is they should support getting that straight also.
I have a technical background but not familiar with all the terminology. So, if it is not a bother could people that post here and are in the know give more concise instructions and explanations to us newbies. We promise we are paying attention and will contribute when we can.
Thanks
Kevin |
|
laserfan
join:2005-01-14
Blanco, TX
| reply to wa5sox1
We got the new firmware night before last. Can't tell any difference in operation. It does seem that our signal strength has gone to hell today (57 vs. normal near 70) but I don't know that this has anything to do with the new firmware, nor do I care until/unless it affects speed or connect-ability.
I can say with confidence that the HN7000S modem upgrade I did this year (over the DW6000) has been a huge improvement with respect to operation in bad weather conditions. I used to lose signal if it rained at all but now it takes a thundercloud overhead to knock us out.
--
HN7000S v5.6.1.35 Home Plan, G13/H1@127W, 1110MHz 33Msps, SigTyp 72, 10-20clients & 6+OSes |
|
