http://www.dslreports.com/forum/r22419910 en Thu, 10 Dec 2009 03:27:55 EDT Thu, 10 Dec 2009 03:27:55 EDT http://www.dslreports.com/forum/remark,22426629 krirish : Ok so my question then is what do I need to do to get it to connect to the configuration server]]> http://www.dslreports.com/forum/remark,22426629 Fri, 22 May 2009 05:48:13 EDT http://www.dslreports.com/forum/remark,22426194 muiredised : Connecting to the configuration server is not going to affect your internet connection. The configuration server is part of 2wire's CMS system that collects CPE data, allows remote upgrades and access by 2wire technicians, and a whole bunch of other things. The router periodically checks in with these servers so even if the connection fails when you run the setup wizard it should continue to phone home until it gets through.

Edit: The missing options you mentioned may require a connection to the configuration server before they appear and/or work correctly however.
--
Assiduus usus uni rei deditus et ingenium et artem saepe vincit]]> http://www.dslreports.com/forum/remark,22426194 Fri, 22 May 2009 00:43:07 EDT http://www.dslreports.com/forum/remark,22424533 krirish : I am still not able to connect to the configuration server]]> http://www.dslreports.com/forum/remark,22424533 Thu, 21 May 2009 18:55:15 EDT http://www.dslreports.com/forum/remark,22422547 ColonelPanic : You most likely still have the AT&T dynamic keycode in the gateway(522P-22P4-6262-22AT-F2NV). If embarq did not provide you with a setup code go to the broadband advanced settings and enter your providers information

•Connection type (PPPoE/PPPoA/Direct IP)
•ATM Path (VPI/VCI)
•IP settings (If applicable)

]]> http://www.dslreports.com/forum/remark,22422547 Thu, 21 May 2009 12:50:19 EDT http://www.dslreports.com/forum/remark,22421116 krirish : A key code is automatically put in when I go in there]]> http://www.dslreports.com/forum/remark,22421116 Thu, 21 May 2009 07:30:23 EDT http://www.dslreports.com/forum/remark,22420596 muiredised : Sounds as if you have the wrong keycode. What keycode are you using?
--
Assiduus usus uni rei deditus et ingenium et artem saepe vincit]]> http://www.dslreports.com/forum/remark,22420596 Thu, 21 May 2009 00:35:33 EDT http://www.dslreports.com/forum/remark,22419910 krirish : OK I had to restart my router when I did that and go into the system summary I am now missing options at the top and also when I try to do system setup and gets to the connection server connection search part it says unable to connect. Does anybody have any ideas?]]> http://www.dslreports.com/forum/remark,22419910 Wed, 20 May 2009 22:01:52 EDT