arthurmnev
join:2001-12-13
Ringwood, NJ
| DIR-825 FW 1.11 A1 stability bug Just polling if anyone has seen this as well, after a few days, the router stops working and needs a power cycle. The last symptom is that it
1) stops forwarding
2) conitunes to respond to pings from the inside
3) wont allow the admin page to be pulled.
Firmware 1.11NA, DIRE-825 A1 | |
|
 
pleekmo
Triptoe Through The Tulips
Premium
join:2001-09-14
Manchester, CT
clubs:
| Re: DIR-825 FW 1.11 A1 stability bug I've had a similar issue with my own DIR-825 Firmware version 1.11NA, hardware version A1.
Router stops WAN forwarding, but continues LAN forwarding (I can remotely access a networked computer on my LAN) and refuses to acknowledge admin page access. This happens after less than 24 hours of use.
I have since temporarily replaced it with a Linksys WRT610N that I happen to have lying about. I eagerly await a revised firmware for the DIR-825.
The firmware on the router has been upgraded:
v1.00 -> v1.01 -> v1.10 beta -> v1.11b01 beta -> v1.11
There have been multiple releases of v1.11 with different file dates, but the binary of each possess the same MD5, but with differences in the text file containing the changelog.
--
HCN: Because you deserve a rest!
Proud member of the Free Omelas Liberation Front. | |
|
 | arthurmnev
join:2001-12-13
Ringwood, NJ | Re: DIR-825 FW 1.11 A1 stability bug Thanks. Not sure which subversion of 1.11 i have.
Did you hear of d-link admitting there is a problem or is this still an uphill battle? | |
|
| |
pleekmo
Triptoe Through The Tulips
Premium
join:2001-09-14
Manchester, CT
clubs: | Re: DIR-825 FW 1.11 A1 stability bug There's a thread about it in the official D-Link forums.
--
HCN: Because you deserve a rest!
Proud member of the Free Omelas Liberation Front. | |
|
|
mbg
@cgocable.net | Have the same problem with DIR-825/A1 and same symptoms here. Everything was fine before I upgraded to this firmware. | |
|
tipstir
join:2004-11-14
Enfield, CT | Links are dead I guess the guy didn't pay his/her bill.. | |
|
|
ShoeyPeachew
join:2009-02-28
Burlington, VT | I have the same problem, but it still happens with DNS Relay off except it happens far less often. Why does D-Link still have FW 1.11 up on their site? Are they nuts or something? | |
|
g33kd0m
join:2009-07-02
Surprise, AZ
| I too have the A1 revision and am running FW 1.11 with the same issues as everyone else. I happened to be looking at some settings tonight, went to the Status Page and went to view the Logs and saw a low memory message. So I turned changed the View Level to show only Critical. I am going to reboot the router after I finish this post.
Not sure if it will help or not, but have nothing else to try. Just like everyone else, my router was working fine with FW 1.01. But me being the dork that I am, wanted to be running the latest FW...  | |
|
|
|
|
|
·
