wnaptech
@wideopenwest.com
| reply to Aimee43
Re: Can't use HDMI cable
Disconnect the co ax cable from the tv and only use the hdmi cable.
follow this link to program your box.
I had the same issue with my bravia, and after upgrading the hdmi cable, I then found these directions and everything has been working fine so far.
3 months.
»www.cisco.com/web/consumer/suppo···3114.pdf |
|
imrf
Premium
join:2002-06-06
Utica, MI | reply to Aimee43
Ok. Try this. Turn off DVR, turn off tv. Unplug HDMI cable. Wait a minute. Plug in HDMI cable, turn on tv then turn on DVR. See if that works. You may even have to remove power from both for this to work initially. Who knows. |
|
Aimee43
@wideopenwest.com | reply to Aimee43
It's a Vizio SV470XVT FHDTV. Just fyi, there's a note that says "The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP). So it appears I do have that! |
|
imrf
Premium
join:2002-06-06
Utica, MI | reply to Aimee43
Whats the model of your tv? |
|
Aimee43
@wideopenwest.com | reply to Joe12345678
Yes, cable goes from TV to digital cable box. My TV says it has HDCP. Any ideas? |
|
Joe12345678
join:2003-07-22
Des Plaines, IL | reply to Aimee43
you tv needs to have HDCP.
is the cable just going from the tv to the cable box? |
|
Aimee43
@wideopenwest.com | Ok, what am I doing wrong? I just connected an HDMI cable and now I'm getting a msg the HDTV doesnt' support HDCP, it says I should disconnect the HDMI and connect the component connectors! I don't want to do that, I want to use the HDMI. |
|
