Re: Speedstream 4200 blocks my dmz after a couple of hours

Author	All Replies
Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	reply to pgosselin Re: Speedstream 4200 blocks my dmz after a couple of hours said by pgosselin : ISP: Bell Bridge Mode: From »192.168.2.1/brgmode.htm Firmware version: Can't get that info now. Modem is setup at another location. Bell Canada? As long as you have the original firmware from Bell Canada, then Bridge Mode will work. You would have to recheck what settings you used for PPPoE in the Juniper. -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-05-29 10:44:18 ·
pgosselin join:2009-05-29	That's my second problem. I can't plug the Speedstream directly in the Juniper for physical reasons. So my D-Link router has to deal with the PPPoE. The D-Link router should forward all trafic to the Juniper using DMZ. But it wasn't working with that configuration. Juniper never has direct access to the internet...
pgosselin join:2009-05-29	to forum · permalink · · 2009-05-29 10:47:13 ·
Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	Then the D-Link needs to be looked at for possible PPPoE issues. There is a D-Link Forum that can help with that. -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-05-29 11:00:31 ·


Tuesday, 01-Dec 11:10:01	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF