zetachi
join:2005-05-13
Kew Gardens, NY
| reply to zetachi
Re: non fios (Time warner) setup-2x Actiontect MI424s as bridge
OK so I'm at wits end here. I consider myself pretty good with computers but this is kicking my butt.
I'm gonna post my trials and tribulations one more time then these are going to be up for sale and it's off to powerline ethernet 
Time warner cable, D-link DGl-4300 wirless router subnet is 192.168.0 2x actiontec MI424 one rev c and one with no rev but older.
setup as in diagram
I've gone through the setup numerous times and have yet to be successful.
Usually once I configure and complete the reboot I can no longer log into the router. If I pull the cat5 and reconnect sometime it logs in but then loses it again. I even configured the 2 routers via direct coax and no luck.
I do get internet if i plug 1 router into my dlink and connect the pc to it so that seems to work but can't get the 2 to make a bridge with the coax.
Any suggestions, tricks long shots I'll take any advice to try as I would really like to work.
thanks |
