dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
2007
share rss forum feed


J559

@nger-ingelheim.com

Blinking System Light HN 9000

We had a bad electrical storm here recently and in the middle my system light Started blinking. I unplugged all my electronics but failed to unplug my HN9000. The LAN lights up but and the system light blinks, but nothing as far as TX and RX. any ideas other than tech nonsupport from hughes.


Aframe
Premium
join:2008-01-30
Uvalde, TX
kudos:1
said by J559 :

We had a bad electrical storm here recently and in the middle my system light Started blinking. I unplugged all my electronics but failed to unplug my HN9000. The LAN lights up but and the system light blinks, but nothing as far as TX and RX. any ideas other than tech nonsupport from hughes.
Have you tried unplugging the modem from the wall for a bit (25 - 30 secs) and then plugging it back in.
--
HN9000/Spaceway III,74m/1w,Elite package,XP Pro,


RickT
Premium
join:2008-06-09
Clovis, CA
reply to J559
Can you access your modem's control center @ 192.168.0.1 to see the status info there?

--
HN9000 Spaceway III Home Plan, iMac PPC G5 10.4.11, Trendnet wireless


J559

@pacbell.net
reply to J559
I've unplugged it but no joy

tobicat
Premium
join:2005-04-18
Tombstone, AZ
Click for full size
Can you reach the advaced pages? If so try a reinstall.

If you can't reach the advanced pages try 169.254.0.1 If that works try a reinstall.

If none of that works you could push the emergency reset on the back and then try a reinstall. It will most likely clear all saved data so you will need the data from your install page.

My install page above. If you do not have that data you are probably out of luck.

Your data would/should be the same as mine except for the lat and long. Worth a try.
--
9000 spaceway III, 7000S SatMex 5 990, Dlink wirless