transferpoint
@sbcglobal.net
| reply to transferpoint
Re: Bridged 2Wire 2701HG-B and Linksys WRT54-G
It didn't work... On the linksys I turned off the AUTO DHCP and tried putting in static addresses that worked in the buisness. I also tried PPPoE with no success. I rebooted the router after each try.
On my At&t 2wire broadband GUI page I have:
DSL Line selection: Auto
ATM Circuit Identifier: VPI: 8 VCI: 35
ATM Encapsulation: Bridged LLC
ATM PVC Search: Enabled
I have the 2wire set to PPPoE |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
 ·AT&T Midwest
| When you get the internet connection working on the 2wire then the connection will work in the house.
There was no need to set "static addresses"
The 2wire lan dhcp server will take care of all lan computer ip addresses
In your first post you said "I ran a speedtest" so the 2wire was setup and connected to the internet.
All you needed to do to have internet in the house was:
Connect a ethernet cable to a 2wire lan port and a lan port on the linksys
Disable the linksys lan dhcp server
That's it no other changes were needed |
|
