Search:  

 
theme to white backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » 2Wire » Port forward w/o DHCP
Search Topic:
 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·Read the FAQs! ·Need Help? ·2W Home Page ·2W Support Page
2Wire problem »
AuthorAll Replies


wayjac
Premium,MVM
join:2001-12-22
Indy		reply to joako
Re: Port forward w/o DHCP

I didn't overlook what you posted
"I need to use another DHCP server on the LAN, using the 2wire will not work"

Are you using a second router for the lan
No matter the details the 2wire is the gateway for the lan
to forum · permalink · · 2009-06-03 17:12:21 · Reply to this


joako
Premium
join:2000-09-07
/dev/null
·AT&T U-Verse

 Everything is connected to the same dumb switch. DHCP is enabled on the 2wire. I need to remote into the network to change the DHCP server settings to assign the correct default gateway. There is 1 machine with a static IP address and it can access the internet.
--
PRescott7-2097
to forum · permalink · · 2009-06-03 17:34:22 · Reply to this


wayjac
Premium,MVM
join:2001-12-22
Indy		 I can't help you with this issue
Someone else may be able to help you
to forum · permalink · · 2009-06-03 17:52:17 · Reply to this

efflandt

join:2002-01-25
Elgin, IL
·AT&T Midwest

reply to joako
said by joako See Profile :

Everything is connected to the same dumb switch. DHCP is enabled on the 2wire. I need to remote into the network to change the DHCP server settings to assign the correct default gateway. There is 1 machine with a static IP address and it can access the internet.
That does not quite make sense. The LAN IP of the 2Wire is your LAN gateway. If you try to remote into that PC on your LAN to change the gateway (2Wire LAN IP), the PC you remoted to would suddenly not have a proper gateway, so you would not be able to reconnect to it to fix its gateway.
to forum · permalink · · 2009-06-11 21:51:37 · Reply to this


joako
Premium
join:2000-09-07
/dev/null
·AT&T U-Verse

 All is resolved now. Someone was putting the default gateway into the "static routes" instead of the proper place.

The 2wire is not the DHCP server, I needed to change the DHAll> All is resolved now. Someone was putting the default gateway into the "static routes" instead of the proper place.
--
PRescott7-2097
to forum · permalink · · 2009-06-11 22:35:42 · Reply to this
-
Forums » Equipment Support » Hardware By Brand » 2Wire2Wire problem »

Sunday, 29-Nov 13:40:00 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [124] Time Warner Cable Fires Broadside At Broadcasters
· [112] New AT&T Ad Campaign Hits Back At Verizon
· [96] Apple Joins AT&T Verizon Snark Fest
· [87] New Bill Takes Aim At Higher Verizon ETFs
· [80] TiVo Sees Record Customer Losses
· [77] Weekend Open Thread
· [76] Verizon CEO: Hulu Will Be Dead Soon
· [69] In-Flight Internet Headed For Bumpy Landing?
· [62] Thanksgiving Open Thread
· [40] EFF Wages War On Fine Print
Most people now reading
· Is Easynews down? [Filesharing Software]
· Are GPS's better today? [General Questions]
· Windows 7 boot manager editing questions [Microsoft Help]
· [Newsgroups] Newzleech down? [Filesharing Software]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Evading throttling with uTP / uTorrent 1.9a [TekSavvy]
· [Future9] Future9 status [VOIP Tech Chat]
· [ PVP] Druid pvp where to start? [World of Warcraft]
· Grey Cup on the Web? [Canadian Chat]
· What is the spell hit cap for a lvl 80 full arcane spec mage [World of Warcraft]