Dark_FiberHere We Go Again.
join:2004-06-13
Saint Charles, MO
1 edit | Redesigned rack-mounted pullout keyboard, mouse & monitor
original 13 inch in new 17 inch opening | 
original 13 inch in new 17 inch opening | 
17 inch in place | 
17 inch in place | 
Frame Primed | 
Frame Primed | 
Keyboard Tray Before | 
Keyboard Tray Primed |
I picked up an OLD Crystal 13" KMM for $10 on eBay. It was sold "as-is" with no testing, but the price was right and it was local, so no shipping necessary. The pullout mechanism worked as well as the combo keyboard/trackball but there was no power supply for the monitor. After some quick measurements, I determined that I could stuff a spare 17" Viewsonic in it...
So far so good; after a couple of hours with an angle grinder, cutoff wheel and flap-disc, I had decent opening to fit the Viewsonic. Next came a couple of coats of grey primer. Should be ready for light sanding and top coat tomorrow (I'm going to use either rough texture paint or hammer finish).
I don't have an exact plan for the hinges, but I have a couple ideas and I'll post more pics when I have some progress to report. |
|
|
|
| Dude NICE work! |
|
Dark_FiberHere We Go Again.
join:2004-06-13
Saint Charles, MO | reply to Dark_Fiber
Keyboard Tray Texture Painted | 
Back Panel Texture Painted | 
Closeup of textured paint |
Here are a few pics of today's progress. I think I'll be able to finish the paint tomorrow...
I'm using Rustoleum Multi-Color Texture Paint, "Aged Iron" flavor...it seemed appropriate since this, in computer terms, is definatly some OLD IRON. I REALLY like the texture paint, but it's easy to lay it down too thick and you've gotta' be sure to maintain adequate distance from the workpiece and use smooth, even-paced strokes. Any unevenness shows up. |
|
| That looks really good. Before I bought my Dell KVM i was looking at building something similar. Seriously man good work! |
|
pro547
join:2004-04-24
London, OH | reply to Dark_Fiber
Dam you beat me to it. I was going to do something similar for my rack. I didn't want to cut my slide table though.
BTW this looks really good. I will keep watching this thread for some good progress. |
|
