Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to DabberDan
Re: SS5200 - administration connectivity issues
What error message or what IP info do you get when you release and renew the DHCP lease using ipconfig?
You are hooked to the Modem direct with a single PC, you are not using a PPPoE Broadband Icon to dial out, correct? When you plugged in the Ethernet cable the LED for Ethernet and the LED on the PC back both lit up, correct?
In a DOS Command Box type "ipconfig /release" then wait 5 seconds ..... then type "ipconfig /renew" now type "ipconfig /all" and post the results.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
DabberDan
join:2004-11-15
Gatineau, ON
 ·TekSavvy Solutions..
| said by Doctor Olds  :What error message or what IP info do you get when you release and renew the DHCP lease using ipconfig? I get a default IP assigned 169.x.x.x (something like that)
said by Doctor Olds :You are hooked to the Modem direct with a single PC, you are not using a PPPoE Broadband Icon to dial out, correct? When you plugged in the Ethernet cable the LED for Ethernet and the LED on the PC back both lit up, correct? Yeah, hooked up directly. The Ethernet light is on and blinks whenever I try to access »speedstream.
said by Doctor Olds :In a DOS Command Box type "ipconfig /release" then wait 5 seconds ..... then type "ipconfig /renew" now type "ipconfig /all" and post the results. I've tried this but it seems to hang. After a while, I close out the DOS window and get 0.0.0.0 assigned. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
1 edit | You should only see zeroes when you press enter after the "ipconfig /release" command as the images show above. They should not be a result after "ipconfig /renew" command.
Your LAN settings should be double-checked and verified to match the two last images above.
You didn't post the output from your "ipconfig /all" command. Still need to see those results. You can use XXXs for the Computer Name and for the MAC ID for your privacy.
Try resetting the Modem again making sure to follow the steps here:
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
