republican-creole
Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » 2Wire » How do I set my MTU setting to 1364 or higher? (Xbox Live)
Search Topic:
Uniqs:
2502
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Trying to use Bridged 2701HG-B with Apple Time Capsule »
« Xbox360 to Windows Media Center via 2wire BT2700HGV  
AuthorAll Replies
-


basecase

@sbcglobal.net
reply to xX360AssasinXx
Re: How do I set my MTU setting to 1364 or higher? (Xbox Live)

lovely. I had the same problem today and just spent about an hour trying to correct.


Cway0420

@cox.net
reply to xX360AssasinXx
Why all of the sudden has my mtu setting changed???


mick59

@eircom.net
reply to xX360AssasinXx
»..'www.softsailor.com/news/4920-···ght.html


mick59

@eircom.net
reply to xX360AssasinXx
they are doing maintenance on xboxLIVE today all day.. There is your is your problem!!! Not your MTU??


xboxsuxdikk

@charter.com

reply to xX360AssasinXx
Re: How do I set my MTU setting to 1364 or higher? (Xbox Live)

they are doing maintenance on xboxLIVE today all day..
says the same problem for me. i have a netgear router and my cable connection is through charter communications, so just incase i really do have a problem with mine can someone find out where i could set up my mtu to 1364+?

kaythreetwo

join:2009-06-16
reply to xX360AssasinXx
I also got this today but XBL is under going maintenance all day so that probably has something to do with it. Try again tomorrow.


wayjac
Premium,MVM
join:2001-12-22
Indy
reply to xX360AssasinXx
Here's a link to the 2wire page where the MTU setting is
192.168.1.254/xslt?PAGE=B05


xX360AssasinXx

@bellsouth.net

  Hello everyone, I'm posting this because I was just about to go on xbox live, and then suddenly , it disconnected me, I tested the connection, it turns out that my MTU settings are lower that 1364 and I need to set it to auto, or put it higher. So I'm trying to get the steps on how to do it. But, it says to go to my router configuration page. Which I don't know what that is! Please help! ASAP

By the way, I have a 2wire router+modem built in, from at&t.
Forums » Equipment Support » Hardware By Brand » 2WireTrying to use Bridged 2701HG-B with Apple Time Capsule »
« Xbox360 to Windows Media Center via 2wire BT2700HGV  


Monday, 30-Nov 05:52:20 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [124] Time Warner Cable Fires Broadside At Broadcasters
· [112] New AT&T Ad Campaign Hits Back At Verizon
· [96] Apple Joins AT&T Verizon Snark Fest
· [87] New Bill Takes Aim At Higher Verizon ETFs
· [82] Weekend Open Thread
· [80] TiVo Sees Record Customer Losses
· [79] Verizon CEO: Hulu Will Be Dead Soon
· [69] In-Flight Internet Headed For Bumpy Landing?
· [63] Thanksgiving Open Thread
· [41] ICANN Slams DNS Redirection
Most people now reading
· Are GPS's better today? [General Questions]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]
· Is Easynews down? [Filesharing Software]
· [Newsgroups] Newzleech down? [Filesharing Software]
· Windows 7 boot manager editing questions [Microsoft Help]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· persistent connection to qw-in-f113.1e100.net on boot [Security]
· ToC 4th boss - Preliminary Strategy for Twin Valkyr [World of Warcraft]
· Grey Cup on the Web? [Canadian Chat]
· [video] Worst Music Video Ever [56k Lookout (Broadband Heavy)]