Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » ZyXEL » Upgrading a Zywall 5
Search Topic:
Uniqs:
423
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
« Zywall SSL 10 PPPOE problem  
AuthorAll Replies


tnroroc
Let's Rock

join:2001-04-25
Matawan, NJ

Upgrading a Zywall 5

It has been a VERY long while, but I have decided to upgrade my Z5 (UTM) with the 4.04 (XD.4)C0 firmware.

I do not remember if I need to upload the .BIN file or the .ROM file first.

What is this firmware.xml file all about?

Is there a preferred / safer way to run this upgrade? Web interface? Telnet? Direct connection using the serial port?

Thanks in advance!
--
rok - Enjoy this game called life, nobody is actually keeping score.


Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON
·TekSavvy Solutions..

What revision are you on?

Here is what I typically do
1) backup your config (mark the FW revision in filename)
2) reboot zywall
3) upgrade firmware (upload the .bin file)
4) check if everything OK. if you see funky behavior reset the unit to factory defaults and reconfigure from scratch (do not upload old backup)


tnroroc
Let's Rock

join:2001-04-25
Matawan, NJ

Current revision: V4.02(XD.2) | 07/31/2007

When does the .ROM file come into play?
--
rok - Enjoy this game called life, nobody is actually keeping score.


Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON
·TekSavvy Solutions..


2 edits
With 4.02 I strongly recommend following

1) backup your config (mark the FW revision in filename) ..just in case
2) take screenshots of your current configuration (for manual entry later)
3) reboot zywall
4) upgrade firmware (upload the .bin file)
5) reset to factory defaults (hold down the HW reset button for 10 sec, or reset through GUI)
6) reconfigure by hand from scratch, do not load old config

.rom is default configuration settings (same as factory reset)
It is included in the firmware itself too, so when you do factory reset (as described above) default settings are loaded


tnroroc
Let's Rock

join:2001-04-25
Matawan, NJ

A big thanks Brano!

I just completed the upgrade and manually reentered everything (now I remember why it was so long between updates ), and all looks good so far. I will keep my eyes on the logs to see if I missed anything or I see anything new.
--
rok - Enjoy this game called life, nobody is actually keeping score.
-
Forums » Equipment Support » Hardware By Brand » ZyXEL« Zywall SSL 10 PPPOE problem  


Tuesday, 10-Nov 09:32:28 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [89] Verizon Keeps Swinging At AT&T
· [84] VoIP Over 3G Still Not Working For iPhone
· [33] Bill Would Force ISPs To Block Financial Scams
· [24] Mediacom Hints At 50, 100 Mbps Speeds
· [16] Clearwire To Get Another $1.5 Billion
· [16] Moto Sold About 100,000 Droids
· [12] Monday Evening Links
· [10] 15 States Have Now Gotten Broadband Mapping Money
· [6] AT&T Launching New 7.2 Mbps 3G Modem
· [3] Sprint Announces Job Cuts
Most people now reading
· How in the world am I going to get into college? [General Questions]
· 60 Minutes piece on cyber security last night [Security]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Windows 7 boot manager editing questions [Microsoft Help]
· A fishy CRTC tarriff filed by bell? [TekSavvy]
· Baisse notable du bitrate pour SRC HD [Videotron]
· Framed for child porn 151; by a PC virus [Security]
· Wood floor opinion... [Home Repair & Improvement]