Upgrading a Zywall 5

Forums » Equipment Support » Hardware By Brand » ZyXEL » Upgrading a Zywall 5


Uniqs: 441	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

« Zywall SSL 10 PPPOE problem

tnroroc
Let's Rock

join:2001-04-25
Matawan, NJ

It has been a VERY long while, but I have decided to upgrade my Z5 (UTM) with the 4.04 (XD.4)C0 firmware.

I do not remember if I need to upload the .BIN file or the .ROM file first.

What is this firmware.xml file all about?

Is there a preferred / safer way to run this upgrade? Web interface? Telnet? Direct connection using the serial port?

Thanks in advance!
--
rok - Enjoy this game called life, nobody is actually keeping score.

permalink · 2009-06-16 15:36:55 · Print ·

Brano I hate Vogons Premium,MVM join:2002-06-25 Burlington, ON ·TekSavvy Solutions..	Re: Upgrading a Zywall 5 What revision are you on? Here is what I typically do 1) backup your config (mark the FW revision in filename) 2) reboot zywall 3) upgrade firmware (upload the .bin file) 4) check if everything OK. if you see funky behavior reset the unit to factory defaults and reconfigure from scratch (do not upload old backup)
	permalink · 2009-06-16 15:49:35 ·

tnroroc Let's Rock join:2001-04-25 Matawan, NJ	Re: Upgrading a Zywall 5 Current revision: V4.02(XD.2) \| 07/31/2007 When does the .ROM file come into play? -- rok - Enjoy this game called life, nobody is actually keeping score.
	permalink · 2009-06-16 16:07:02 ·

Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON

·TekSavvy Solutions..

2 edits

Re: Upgrading a Zywall 5

With 4.02 I strongly recommend following

1) backup your config (mark the FW revision in filename) ..just in case
2) take screenshots of your current configuration (for manual entry later)
3) reboot zywall
4) upgrade firmware (upload the .bin file)
5) reset to factory defaults (hold down the HW reset button for 10 sec, or reset through GUI)
6) reconfigure by hand from scratch, do not load old config

.rom is default configuration settings (same as factory reset)
It is included in the firmware itself too, so when you do factory reset (as described above) default settings are loaded

permalink · 2009-06-16 20:40:39 · Print ·

tnroroc Let's Rock join:2001-04-25 Matawan, NJ	Re: Upgrading a Zywall 5 A big thanks Brano! I just completed the upgrade and manually reentered everything (now I remember why it was so long between updates ), and all looks good so far. I will keep my eyes on the logs to see if I missed anything or I see anything new. -- rok - Enjoy this game called life, nobody is actually keeping score.
	permalink · 2009-06-18 20:32:51 ·

your comment..

Forums » Equipment Support » Hardware By Brand » ZyXEL	« Zywall SSL 10 PPPOE problem


Saturday, 28-Nov 10:05:22	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF