U-verse static address port mapping

Author	All Replies
real_goose join:2001-04-13 Grosse Pointe, MI ·Evoice ·VoicePulse for Bus.. ·AT&T U-Verse ·Comcast ·callwithus	U-verse static address port mapping Perhaps your device can not map ports to a static address, but it works for me. Several SIP ports are mapped to my Asterisk PBX which is on a static, not DHCP address. The router is a 3800HGV-B Gateway and the computer is 192.168.1.11. I just created the custom mapping and assigned it to the computer - no problems.
	to review · permalink · · 2009-06-16 16:12:30 ·
cowboyro join:2000-10-11 Shelton, CT ·AT&T U-Verse ·Comcast ·Optimum Voice	said by real_goose : Perhaps your device can not map ports to a static address, but it works for me. Several SIP ports are mapped to my Asterisk PBX which is on a static, not DHCP address. The router is a 3800HGV-B Gateway and the computer is 192.168.1.11. I just created the custom mapping and assigned it to the computer - no problems. I have the same RG, but the issue is that it cannot map ports to a (static) IP that it cannot see - if it's not in the list then you can't map - example a server that has 2 IP's in the same subnet (don't ask why, there is a long story behind it), only one of the IP's is visible in the selection list of the firewall. Sure this is fairly uncommon and the design is good for 99.5% of users... and I could probably get around it with some changes in my network.
	to review · permalink · · 2009-06-18 08:17:42 ·


Wednesday, 09-Dec 05:42:12	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF