efflandt
join:2002-01-25
Elgin, IL
 ·AT&T Midwest
| reply to funnytim
Re: Using 2wire router/modem with pocket pc
Unless you changed security settings, the default WEP key is probably on the 2Wire label if it is anything like my AT&T 2701HG-B.
I have no trouble connecting and using my wireless-b Palm TX to that (with other mixed g and b wireless clients). Of course it does not do Windows, so it just shows up by its IP address on the 2Wire, not a netbios name. |
|
OFBulldog
@qwest.net
| reply to funnytim
said by funnytim :
Hi,
I'm using a 2Wire modem/router provided to me by telus.
While I've been able to get it connected with all of my PCs (via wired), I'd like to be able to use my pocket pc mobile to connect to the wireless too.
The pocket PC is able to see the 2wire connection and connect to it, but when I try to go to a webpage it always says "the page cannot be found". In addition, on the 2wire page it shows the wireless devices connected as "0".
How can I fix this problem ? Thanks !
The symptom of "0 devices connected"means you may be connected at a basic level but your router and wireless device aren't passing traffic. When you connected, did it ask for a network key? |
|
funnytim
@telus.net | reply to wayjac
Hi,
Sorry, by "0" i meant the 2wire device said zero devices were connected to it via wireless.
Unfortunately I don't know where I can find the mac address in my pocket pc. thanks again |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | reply to funnytim
said by funnytim :
on the 2wire page it shows the wireless devices connected as "0".
Can you post a image of "0"
Check the mac address of "0" it should match the pocket pc's mac address |
|
funnytim
@telus.net
| Hi,
I'm using a 2Wire modem/router provided to me by telus.
While I've been able to get it connected with all of my PCs (via wired), I'd like to be able to use my pocket pc mobile to connect to the wireless too.
The pocket PC is able to see the 2wire connection and connect to it, but when I try to go to a webpage it always says "the page cannot be found". In addition, on the 2wire page it shows the wireless devices connected as "0".
How can I fix this problem ? Thanks ! |
|
