Jim_in_VA
join:2004-07-11
Cobbs Creek, VA
 ·Verizon Wireless B..
·Sprint Mobile Broa..
·Millenicom
| reply to shelterwatch
Re: 'Forcing' EVDO vs. 1XRTT in Sprint via Millenicom?
go here and download the latest version if you don't have it:
»www.nextel.com/en/software_downl···27.shtml
--
... need help? »evdo-tips.com/ |
|
shelterwatch
join:2008-06-15
Mojave, CA
·Millenicom
| Thanks. I have the latest version when I checked that link. Thank you for that.
Under the "hardware" tab, I did find something like what might be what you were referring to:
It says 'devices' then way over to the right it says 'selection' 'status' and 'settings'.
Below that, it says 'mobile devices' and has the choices of 'automatic' 'disabled' or 'manual'. next to that is a 'modify' choice.
Below that it says 'Novatel Wireless Ovation U727' There is a check mark next to that and I have it set to 'automatic'.
Further down there are several choices with boxes to check or uncheck:
__ Allow simultaneous connections
__ Prompt before switching connections |
|
Jim_in_VA
join:2004-07-11
Cobbs Creek, VA
·Verizon Wireless B..
·Sprint Mobile Broa..
·Millenicom
| none of that will help. You can by-pass the connection manager entirely by using your modem in a DUN (dial up networking) configuration:
Start> Connect To> Show All Connections ...right click your modem that's under "Dial-up" and select connect
See if that helps
--
... need help? »evdo-tips.com/ |
|
