1 edit | reply to Hibbert
Re: P-663H-51 problems persist If its g.bond it could be an issue that seems to be with that, when one of the lines are noisy/unstable.
But no workaround for it as far as I know, as of yet.
--
"Perl is executable line noise, Python is executable pseudo-code."
|
|
| zhone say they have no knowledge of such problems working against their Broadcom based DSLAMS.
So is it Zyxel DSLAM specific? Reading between the lines zhone kinda implied that maybe the Zyxel DSLAM firmware was not built on the latest base firmware from Broadcom.
What is noisy/unstable? My lines are not short (around 40db downstream attenuation). They are relatively very quiet and stable with 2-3db SNR variation over the day. I run with a target SNR which is giving about 1 in 3000 downstream superframe errors and 1 in 100,000 up. Is that supposed to be noisy? |
|
