loadmaster
join:2001-01-10
San Jose, CA | reply to Doctor Olds
Re: [Home Networking] HELP: After switch to ATT from Covad I can
Windows has the ability to set the VPI/VCI settings but the Zywall router does not have the ability to set these. Only the optional service, login user, password, CHAP/PAP authentication type, and nailed up time. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| said by loadmaster  :Windows has the ability to set the VPI/VCI settings but the Zywall router does not have the ability to set these. HUH? The ZyXEL Routers I have used and even the Earthlink Supplied ZyXEL units all have a settings page for VPI/VCI in the DSL Modem or the PPPoE would not work.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
loadmaster
join:2001-01-10
San Jose, CA
| The router is not Earthlink supplied. |
|
e_dub
franknbeans
Premium,VIP
join:2001-08-12
kickin ass
| What model Zyxel is that? I'm wondering if that Zyxel auto detects the VPI/VCI.
edit:
I don't know what model you have but this is from a P-662HW/HW-D. Go to page 85, section 5.4.
»ftp://ftp2.zyxel.com/P-662HW-D3/user_g···_Ed3.pdf |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to loadmaster
said by loadmaster :The router is not Earthlink supplied. Aha, you have a E2E (Ethernet to Ethernet) Router that is not a ADSL Modem also. That is why the VPI/VCI is not there as that is a ATM setting for the DSL side of things. You have to also use a DSL Modem or you cannot connect and the DSL Modem holds the VPI/VCI setting.
DSL Modems have the VPI/VCI either stored in a Table to run though to find the Active VC or they are a single setting supplied and entered during initial configuration for PPP (oE or oA).
Bridge Only DSL Modem
DSL Modem with Router included (2 in 1 Device)
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
