Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to BobbyS
Re: speedstream 5200
When you hook up any unit that has DHCP enabled it will tell you what IP to use by reading the Default Gateway after running the command "ipconfig /all" in a DOS Command Box. This is outlined in the FAQ below:
»Efficient Networks Forum FAQ »How do I Troubleshoot Web GUI Connection to 192.168.254.254?
==============================
060-e240-033 is a Bell Sympatico (now Bell Canada) unit and has a Firmware fix available but always verify the Part Number/Firmware revision before flashing. It uses IP »192.168.2.1
»Speedstream 5200 Updated Firmware HERE
**************************************
060-e240-014 appears to be a Bridge only 5200 and it would not show a Default Gateway IP, (verify that this is true) as you have to setup your PC with a Static IP of 10.0.0.2 and add an ARP Entry to access the Modem at IP »10.0.0.1 using its MAC ID.
»Bell Canada Internet FAQ »Telnet with Speedstream 5200 E240
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
