jmpage2
join:2005-02-24
Littleton, CO | USG100 as wireless router (via PCMCIA)? I can't access the manual on the USG 100 right now but I am wondering if it is equipped with a Wireless N card via the PCMCIA bridge if it can act as a full wireless router and DHCP server for wireless clients on the network?
One advantage of getting the USG100 and using it in this fashion would be the ability to retire a small Wireless G Tomato based router.
One other brief question, is the device able to route between two subnets VLANs and provide separate DHCP function for each? We have a VoIP phone network that I would like to be able to put into its own subnet for security and performance purposes.
Thanks. |
|
| No. It can not. At least not with that card.
Why can't you access the manual btw ? If you can post this question you are obvious online.
All ZyXEL Manuals, User Guides, Support Notes, all are online. See for this one: »ftp://ftp.zyxel.com/ZYWALL_USG_100/use···2.11.pdf
Or go to »ftp://ftp.zyxel.com/ and do some browsing yourself.
Bwuutje. |
|
jmpage2
join:2005-02-24
Littleton, CO | Apparently the Zyxel site doesn't like Safari, and I've temporarily uninstalled Firefox. |
|
| Then use any other FTP client that is installed by default on your MAC. Open a terminal window and enter "ftp".
Bwuutje. |
|
