Equipment Support > Hardware By Brand > Efficient > Where is documentation on SpeedStream 5262 (060-5262-006)?

reply to Doctor Olds

Re: Where is documentation on SpeedStream 5262 (060-5262-006)?

No confusion. I did not use the instruction link for a unrelated modem for anything other than to simply obtain what the correct VPI/VCI setting should be for Sonic.net the ISP. That's all. If you already knew the proper VC values needed then I apologize for adding info that you don't need.

You would need to use a PC with a PCI Ethernet card along with the EnterNet Software if your current PC with onboard Ethernet does not show a DSL Modem tab.

Doctor:

Your properties sheet shows version $2.1.0(7). I've installed from file Enternet300v1.5c_sp2.exe, which displays as version 1.5C dated Mar 6, 2002. This is lower rev than yours, yet later date. The display is different color (tan) as well. Any idea what's up with this?

-- Roy

It is an example image and the Firmware version isn't anything related to the EnterNet Software, it is the Firmware on the Modem that has its revision shown after it connects. The image was from a Win98 PC with a different color scheme than Server 2003.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

reply to FUBARinSFO
There's a very good chance that your 060-5262-006 is a sbc modem.
The factory vpi/vci is 0/35 for the sbc 060-5262-006
The version date for enternet 1.5C is wide

Wayjac:

Thank you for the screen shots. I don't know if its an SBC modem or not, as I just happened to have received it randomly and am using it as a test. Your screen shot looks like mine, except that it has the DSL Modem tab. SBC I think supports PPPoE connectivity, whereas sonic.net does not.

-- Roy

reply to Doctor Olds
Doctor:

I've pretty much exhausted my patience and the capabilities of my three systems here to access this modem via Enternet. If it indeed does MAC-level addressing, I'm not seeing it here, as I'm not able to get it to communicate with the hardware.

The two Windows XP systems both have onboard NICs, so evidently that rules them out. The Windows 2003 Server has a PCI NIC, but perhaps at some level it is doing MAC-level filtering. I've got a Win98 system that I'm tempted to use this on, but for the moment I'm abandoning this effort. Thanks for your help with this.

-- Roy

I do not know if the EnterNet 300 software will work now that I think about you using Server 2003 since XP (and earlier) is the latest OS the EnterNet 300 1.5C will support by the documents I've read.

Try the Win98 PC.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

reply to FUBARinSFO

Doctor:

The comments I made about web GUI access related to a different but similar issue than the one discused in this particular thread. I'll post the solution in a separate thread.

This modem works exactly as advertised, no problems. What started as a search for documentation ended in the attempt to access the PVC setting with Enternet 300. No need to access them with sonic.net, evidently, since the modem works fine. But in other thread it has been noted that ISPs may have been using the PVC settings (0*35 vs 0*38 or 0*0?) to link the modem to their network and render them unususable on another ISP's network. I was just interested in addressing that capability with Enternet 300.

I may try Win98 -- but this is really marginal at this point, except as a point of closure.

Thanks again for your help. You are a one-man ENI support staff -- I home somebody at Siemens is paying attention, if not paying you directly somehow.

-- Roy Zider

OK, thanks for the clarification.

I am here un-compensated. I do this because I enjoy helping others.

reply to FUBARinSFO

Yes, picture is same as the modem I've got.

reply to Doctor Olds
Doctor Olds:

Seems I can't drop this. I hooked up the 5262 to a Win98SE machine and installed Enternet 300 1.5c. But still no modem tab.

So my question is: Will Enternet 300 communicate with the modem if it isn't hooked up to the internet? That is, just unplug the cable to the DSL phone line -- in my case, I get no DSL Modem tab. Do you happen to know? Seems to me I should get something here, even if there's no connection to the internet.

-- Roy

Yes, EnterNet 300 works regardless of having a DSL signal or Not as you are communicating to the LAN side of the Modem, not the WAN side.

I don't know why it is giving you so much trouble, but it does work on the 5262 as seen here:

»5262/5262 All lights on but will not connect

HTH