 wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | reply to FUBARinSFO
Re: Where is documentation on SpeedStream 5262 (060-5262-006)? There's a very good chance that your 060-5262-006 is a sbc modem.
The factory vpi/vci is 0/35 for the sbc 060-5262-006
The version date for enternet 1.5C is wide
|
|
| Wayjac:
Thank you for the screen shots. I don't know if its an SBC modem or not, as I just happened to have received it randomly and am using it as a test. Your screen shot looks like mine, except that it has the DSL Modem tab. SBC I think supports PPPoE connectivity, whereas sonic.net does not.
-- Roy |
|
wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | said by FUBARinSFO:I don't know if its an SBC modem or not, as I just happened to have received it randomly and am using it as a test. I'm pretty sure its a sbc modem
|
|
 Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18 | said by wayjac:said by FUBARinSFO:I don't know if its an SBC modem or not, as I just happened to have received it randomly and am using it as a test. I'm pretty sure its a sbc modem Earthlink and other ISPs also used the 5260s and the Extended Reach 060-5262-00X part numbered units. There were even Model 5263 with part number 060-5263-001 given out as seen here »cosmosing.com/classified/-1_Unit···_00.html
HTH
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
| Yes, picture is same as the modem I've got. |
|
| reply to Doctor Olds
Doctor Olds:
Seems I can't drop this. I hooked up the 5262 to a Win98SE machine and installed Enternet 300 1.5c. But still no modem tab.
So my question is: Will Enternet 300 communicate with the modem if it isn't hooked up to the internet? That is, just unplug the cable to the DSL phone line -- in my case, I get no DSL Modem tab. Do you happen to know? Seems to me I should get something here, even if there's no connection to the internet.
-- Roy |
|
Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
1 edit | Yes, EnterNet 300 works regardless of having a DSL signal or Not as you are communicating to the LAN side of the Modem, not the WAN side.
I don't know why it is giving you so much trouble, but it does work on the 5262 as seen here:
»5262/5262 All lights on but will not connect
HTH |
|
