tobicatPremium
join:2005-04-18
Tombstone, AZ | reply to mountainfrog
Re: [HN7000S] Registration Server Problem I am not 100% sure but I believe that it will stop at the antenna pointing phase and show a signal strength of 30 and never go higher.
--
9000 spaceway III, 7000S SatMex 5 990, Dlink wirless |
|
| Stuck before the final step Well, it passed the ACP-test, established sat comm, downloaded encryption keys and authentication was successful (at least that was what it said).
Normally I leave the box for the registration server empty and the system connects to the correct server IP automatically.
I tried that.
Also put in 66.82.19.27.
Then it would give me "failed to resolve IP address" and a "network timeout on "66.82.19.27".
So, could it still be that as I got that far that the modem is not free to be commissioned again?
Or is there something I should know at that critical step to get me further to the registration boxes?
m'frog |
|
