Acronis TI Build 9796 Released 6-24 in Software http://www.dslreports.com/forum/r22612369 en Sun, 22 Nov 2009 21:26:32 EDT Sun, 22 Nov 2009 21:26:32 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22654894 takeahike : Well, looks ok. Do I go so far as to make my boot disk of this version?]]> http://www.dslreports.com/forum/remark,22654894 Sat, 04 Jul 2009 19:04:05 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22643397 howie :
said by splashd :

I tried to install, but I get a Windows crash dialog on XP just after double-clicking the install file I downloaded (I redownloaded-- same result). I'll revert to TI version 10 for now...This is not what I expected for my $25 upgrade...
Did you check the hash(es) of the setup file you downloaded? If it matches what I posted above, you should be fine, as the updated installer should not crash.

I'll re-post them:

CRC32: 5D63AA6D
MD5: 0F7B0C028FCC684E836094D743FCF6EB
SHA-1: 1E1736465740E696C78AAED98B9301C63A3063A5]]> http://www.dslreports.com/forum/remark,22643397 Thu, 02 Jul 2009 05:13:52 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22642901 Dustyn : For myself, #9796 installed correctly without any install issues under XP64.]]> http://www.dslreports.com/forum/remark,22642901 Thu, 02 Jul 2009 00:08:59 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22642862 anon : I tried to install, but I get a Windows crash dialog on XP just after double-clicking the install file I downloaded (I redownloaded-- same result). I'll revert to TI version 10 for now...This is not what I expected for my $25 upgrade...]]> http://www.dslreports.com/forum/remark,22642862 Thu, 02 Jul 2009 00:00:52 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22637830 Dustyn : Looks like they finally got it fixed. (third time around)
May give it a shot... though I'm hesitant.]]> http://www.dslreports.com/forum/remark,22637830 Wed, 01 Jul 2009 01:07:41 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22637446 howie : In case anyone's interested, here is the hash info for the "fixed" build 9796 install file:

CRC32: 5D63AA6D
MD5: 0F7B0C028FCC684E836094D743FCF6EB
SHA-1: 1E1736465740E696C78AAED98B9301C63A3063A5]]> http://www.dslreports.com/forum/remark,22637446 Tue, 30 Jun 2009 22:59:07 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22636490 janderso1 : The last time I tried to update TI 2009 it told me my SN was invalid and gave me a URL to check it and if necessary get a replacement. :( The check program indicated I had a valid SN (which I paid for and is registered with them) and asked me to email the Acronis registry entries and msinfo which I did. I also restored the PC from a backup using TI2009 under Bartpe and reinstalled the prior version that accepted my paid for SN. After two days without a reply to my email I checked the Acronis site and they had removed the update and replaced it with the older version that still works for me.

My educated guess is that they added a check for some pirated SNs and the check isn’t very accurate. :(

I am going to wait awhile for the dust to settle before I try this upgrade and I will have a current backup before I try it.
--
Jim Anderson]]> http://www.dslreports.com/forum/remark,22636490 Tue, 30 Jun 2009 19:18:48 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22636378 WFO :
said by howie See Profile :

said by DaHen See Profile :


Yeah, SP is a great imaging program. I'm using both SP 3.3 and TI 2009. One can never have too many backups! ;-)
You've got that right!!! ;) I've got 9791 and 9796 downloaded. I'll probably hold off another week and continue watching the forum at Wilders before installing. :uhh:
--
Coolermaster HAF
I-7 920
12GB G.Skill DDR3 1600
3 X60GB OCZ SSDs Raid 0
2 X 500GB Sata IIs Raid 0 storage
Asus P6T
9800GX2
Windows 7 x64]]> http://www.dslreports.com/forum/remark,22636378 Tue, 30 Jun 2009 18:55:55 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22635187 howie :
said by DaHen See Profile :

I have jumped the fence and gone with ShadowProtect.

Seems that I couldn't mount any of my backups with TI version 11. Even going back to version 9 b2337. Contacted support. They tried but after it was escalated to Tier 2, I haven't heard from them. (Perhaps that should have been Tear 2. lol) :huh:


Yeah, SP is a great imaging program. I'm using both SP 3.3 and TI 2009. One can never have too many backups! ;-)]]> http://www.dslreports.com/forum/remark,22635187 Tue, 30 Jun 2009 14:58:39 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22634704 DaHen : I have jumped the fence and gone with ShadowProtect.

Seems that I couldn't mount any of my backups with TI version 11. Even going back to version 9 b2337. Contacted support. They tried but after it was escalated to Tier 2, I haven't heard from them. (Perhaps that should have been Tear 2. lol) :huh:

]]> http://www.dslreports.com/forum/remark,22634704 Tue, 30 Jun 2009 13:33:18 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22634643 howie : They got it right now.... or have they? ;-)

[EDIT] FWIW, I just did a full backup and restore (using the new 9796 boot media). No issues to report. :-)
]]> http://www.dslreports.com/forum/remark,22634643 Tue, 30 Jun 2009 13:23:48 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22632948 gate1975mlm :
said by Fedorov See Profile :

It's almost impossible to trust this company these days - I'm sticking with my current TI 2009 build, it works on my machines.

Fills you with ZERO confidence that in the past few weeks all I've seen is different build numbers appear/disappear and then mismatches of versions etc.....
Im a fan of True Image but I have to agree.

What the heck is Acronis programmers upto?]]> http://www.dslreports.com/forum/remark,22632948 Tue, 30 Jun 2009 09:27:02 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22632342 Fedorov : It's almost impossible to trust this company these days - I'm sticking with my current TI 2009 build, it works on my machines.

Fills you with ZERO confidence that in the past few weeks all I've seen is different build numbers appear/disappear and then mismatches of versions etc.....]]> http://www.dslreports.com/forum/remark,22632342 Tue, 30 Jun 2009 04:16:23 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22631669 Dustyn : I'm not going to install this botched up build.. even if they do re-release it later. Think I'll stick with the previous build for a while.]]> http://www.dslreports.com/forum/remark,22631669 Mon, 29 Jun 2009 23:21:05 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22630057 howie : 9796 is up but it fails (crashes) as soon as you run setup... :mad: I see it's a known issue... I hope they fix it ASAP.

[EDIT] Link to issue over at Wilders:
»www.wilderssecurity.com/showthre···t=246541
]]> http://www.dslreports.com/forum/remark,22630057 Mon, 29 Jun 2009 18:10:43 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22624037 takeahike : Same here. oh well.]]> http://www.dslreports.com/forum/remark,22624037 Sun, 28 Jun 2009 14:02:45 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22619885 howie : Right you are, Dustyn! :-)
]]> http://www.dslreports.com/forum/remark,22619885 Sat, 27 Jun 2009 10:19:03 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22619092 Dustyn : So is 9796 a NEW build?
Or is 9791 the new build?
I'm just wondering if they have failed to update the links to 9796 as it's misslabeled. I have been live chatting with a REP at ATI and he needs more info on my end as he tried sending me 9796 but it was 9791 again.
EDIT: Found out it's a GUI issue. It's build #9791. It is either a GUI mistake or a mislabeled version number. Either way there is NO build #9796.

»www.wilderssecurity.com/showthre···=1491952
Click for full size
]]> http://www.dslreports.com/forum/remark,22619092 Sat, 27 Jun 2009 01:04:28 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22619060 redxii : They say it's 9796 but it's really 9791.]]> http://www.dslreports.com/forum/remark,22619060 Sat, 27 Jun 2009 00:53:50 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22619031 Dustyn : Yeah it says it's version #9796, but when you download the file and hover over file, it says #9791. Are you sure you guys got version #9796?]]> http://www.dslreports.com/forum/remark,22619031 Sat, 27 Jun 2009 00:43:35 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22612927 Keizer : Downloading now.....thanks!!]]> http://www.dslreports.com/forum/remark,22612927 Fri, 26 Jun 2009 00:51:55 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22612524 howie :
said by WFO See Profile :

I've been using Shadow Protect too. I'll give this a spin on one of my Win 7 rigs. :)
They seem pretty equal speed-wise when imaging, although I find a full restore for me is about 1 to 2 minutes faster with SP.]]> http://www.dslreports.com/forum/remark,22612524 Thu, 25 Jun 2009 23:13:04 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22612429 WFO : I've been using Shadow Protect too. I'll give this a spin on one of my Win 7 rigs. :)]]> http://www.dslreports.com/forum/remark,22612429 Thu, 25 Jun 2009 22:51:27 EDT Re: Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22612410 howie : Thanks! I was still running 9788.
I use ShadowProtect and TI 2009 now (redundancy is good). :-)
]]> http://www.dslreports.com/forum/remark,22612410 Thu, 25 Jun 2009 22:46:57 EDT Acronis TI Build 9796 Released 6-24 http://www.dslreports.com/forum/remark,22612369 WFO : Fixed issues
• Fixed resetting of password and encryption options when editing a task prior to its first run
• Fixed the issue of incorrect log entry when scheduled task for incremental backup to USB HDD (which is recognized as non-removable) fails when this HDD is not present, but the log says "Operation has succeeded."
• Fixed loss of some default "File level security options" during My Data task creation
Known issues and limitations of the version:
• Acronis True Image Home is unable to search:
o Archives in ZIP and TIB format on removable media
o Archives in ZIP format using GDS and WDS
• Archive to various places (AVP) does not work with FTP Server and the Acronis Secure Zone.
• Acronis True Image Home doesn't support backing up in compressed zip format to CD/DVD.
• The progress bar hangs when writing backups to CD\DVD. Please note that this does not prevent successful completion of the backup.
• Acronis True Image Home does not support GUID Partition Table (GPT) and dynamic disks. Dynamic disks are a type of RAID (Redundant Array of Inexpensive Disks) storage supported by the Microsoft Windows operating system. Hardware-based RAID sets are supported by the software.
• When upgrading from Acronis True Image 11 Home, tasks are not ported to Acronis True Image Home 2009. Also, it will not be possible to edit tasks created with Acronis True Image 11 home, and previously created scheduled tasks must be recreated following the upgrade.
• When updating from ATIH 11 with activated Acronis True Image Startup Recovery Manager (ASRM) to Acronis True Image Home 2009, the ASRM operates in trial mode by default. The user will not be able to create backups, only restore backups. In order to create backups from the ASRM, first deactivate the ASRM by going to Tools->Activate Startup Recovery Manager->Deactivate and then re-activate the ASRM by going to Tools->Activate Startup Recovery Manager->Activate

Log in to your account to collect the update. :)

»www.acronis.com/homecomputing/su···pdates/#]]> http://www.dslreports.com/forum/remark,22612369 Thu, 25 Jun 2009 22:38:10 EDT