Gregor
|  Zywall USG 100 more public IP Adresses
I've a USG 100 with an ISP Connection with 20 public IP adresses. How can I bind them to the USG?
If I create a VLAN with the next public IP and bind the VLAN to the WAN1 port, I'm able to ping, but if I create an Virtual Server, the rule dose not work.
It is possible to have more than one public IP Adress and redirect to serveral virtual Server?
Sample:
Public IP : 1.1.1.1 --> Private IP. 5.5.5.5 Port 80
Public IP : 2.2.2.2 --> Private IP: 6.6.6.6 Port 80
Public IP : 3.3.3.3 --> Private IP : 5.5.5.5 Port 80 (with Host Header)
Thank you in advance
Br
Gregor | |
|
 Bwuutje
join:2005-01-10
| Re: Zywall USG 100 more public IP Adresses Forget VLANS.
You just need to make Virtual Server Rules. And for the Original IP you fill in the public ip you want the USG to react to.
And don't forget to make the corresponding firewall rule. Its that simple
Bwuutje.
ps: and please update your firmware, 2.12(AQQ.0) is the latest. | |
|
 |
Gregor
| Re: Zywall USG 100 more public IP Adresses Thank you for your answer, but I've tried serveral time to create an Object with the public IP and insert a Virtual Server rule, but without success. I really don't know what I'm doing wrong.
Thanks for your help, any other advise?
Are you sure that a Zywall USG 100 support more public ip adresses?
br
gregor | |
|
| |
Gregor
| Re: Zywall USG 100 more public IP Adresses New Info:
If I tracert the Public IP, I only get a reply from the WAN1 IP Adress and the log of the USG shows this:
intra-zone blocking on WAN, ICMP Type:8, REJECT
Do you know the message?
THANKS
br
Gregor | |
|
jimmiea
join:2009-07-16 | I'm having the exact same problem.
It seems so easy in the virtual server settings but it still not works.
Even if I disable the Firewall it still not work.
Have you Gregor got it to run yet? | |
|
jimmiea
join:2009-07-16 | I figured it out!!
My servers where still on my old gateway, as soon as I switched to this new IP it worked great =) | |
|
|
|
|
