drew1114
join:2009-02-18
Adkins, TX
| reply to tipstir
Re: [Help Me] clearing the nvram on a Dgl 4500
Hey tipstir, couple a days ago installed the 1.20na on the router and the date of the firmware was 5/11/09 well i cleared the nvram awhile ago reinstalled the same firmware, and configured my router from scratch, but on the date of the firmware i just installed it says 4/29/09 do you have any idea why it did this? |
|
tipstir
join:2004-11-14
Enfield, CT
 ·Cox HSI
| said by drew1114  :Hey tipstir, couple a days ago installed the 1.20na on the router and the date of the firmware was 5/11/09 well i cleared the nvram awhile ago reinstalled the same firmware, and configured my router from scratch, but on the date of the firmware i just installed it says 4/29/09 do you have any idea why it did this? What is the firmware version on the unit now. Then repeat the process.. |
|
drew1114
join:2009-02-18
Adkins, TX
| when i went to the properties of the firmware i downloaded it says modified date of 4/29/09 so think that is where it got date from so do you think i should download the firmware again reinstall it or should i just leave it, cause it seems to be running fine. |
|
tipstir
join:2004-11-14
Enfield, CT
·Cox HSI
| said by drew1114 :when i went to the properties of the firmware i downloaded it says modified date of 4/29/09 so think that is where it got date from so do you think i should download the firmware again reinstall it or should i just leave it, cause it seems to be running fine. If it's running fine just leave it. You can always download the current firmware to use later if you have issues. Other than that I would keep using what your using now. |
|
