ju421019
join:2009-02-28
Orlando, FL
| DIR 655 Mixed Network G and N? Should I just use G? Hi - right now I have a DIR 655 at home and out of all my devices only one has Wireless N card on my work laptop, the rest are on G.
Even then the speeds seem slower on that N laptop, it's some Intel N card wireless, which i don't know why is slow.
Either way, I was inquiring should I just set my DIR 655 to use Wireless G only and keep the Mhz to i think its 20.
Or use both the n/g.
Want to maximize bandwidth for downloading etc. and speed. Don't use the work laptop that much at home.
Any suggestions?
Thanks! | |
|
 MLGTWISTED
join:2007-01-19
Melville, NY
| Re: DIR 655 Mixed Network G and N? Should I just use G? If you don't have connectivity issues with a mixed network I don't think there's anything wrong with the mixed settings. If you have wireless connection issues then I would advise just using g only. You can check your wireless connectivity to see what rate n and g are connecting at, and see if the rate changes too much.
You could even lock in a rate if you wish; which I personally prefer to do.
I'm not sure how good the 655 is at a mixed network, so maybe somebody with more experience with this router can answer. | |
|
tipstir
join:2004-11-14
Enfield, CT | I use 802.11b/g/n mode it's more stable that 802.11g/n or 802.11n.
Use 20/40hz
Use WPA2/AES
Auto Channel | |
|
 | 
PamelaTS
join:2004-04-20
Dallas, TX
 ·AT&T Southwest
| Re: DIR 655 Mixed Network G and N? Should I just use G? said by tipstir  :I use 802.11b/g/n mode it's more stable that 802.11g/n or 802.11n. Use 20/40hz Use WPA2/AES Auto Channel Interesting but lets be totally truthful B/G/N is only more stable for G & N as for B its useless | |
|
| |
tipstir
join:2004-11-14
Enfield, CT
 ·Cox HSI
| Re: DIR 655 Mixed Network G and N? Should I just use G? said by PamelaTS :said by tipstir :I use 802.11b/g/n mode it's more stable that 802.11g/n or 802.11n. Use 20/40hz Use WPA2/AES Auto Channel Interesting but lets be totally truthful B/G/N is only more stable for G & N as for B its useless I am 98% using N and 2% using G, but not always..This is how Belkin N+ works best so doing it on D-Link works too. Big difference in chip set features as I can see how D-Link is going for Ralink over the Atheros.
120/270 or 150/300 daily now instead of the wacko N only or G/N only combinations those give poor results like 60mbps for N over 120. Not good. | |
|
|
|
|
