tilt9Premium
join:2003-04-11
USA | Does Ubiquiti NanoStation have manual ant. polarity setting? I need to install (2) more P-t-P links on a tower where (3)5ghz and (3)2.4ghz channels are already used. I was looking at using the Bullet 5 and turning a grid antenna to run in horizontal polarity to try avoiding interference with the (3) ghz radios already in operation there, but...
My (3) 2.4ghz antennas are running vertical polarity. If the nanostation can be set to only run horizontal, I could use 2.4, and it would be cheaper/simpler than seperate grid antennas etc... |
|
| Yup, its just a setting in the OS. |
|
|
|
1 edit | reply to tilt9
said by tilt9:I need to install (2) more P-t-P links on a tower where (3)5ghz and (3)2.4ghz channels are already used. I was looking at using the Bullet 5 and turning a grid antenna to run in horizontal polarity to try avoiding interference with the (3) ghz radios already in operation there, but... My (3) 2.4ghz antennas are running vertical polarity. If the nanostation can be set to only run horizontal, I could use 2.4, and it would be cheaper/simpler than seperate grid antennas etc... |
|
 funkyfeltyArmament For Peace
join:2002-10-01
Lebanon, PA | reply to tilt9
it is under the Advanced Tab, then look for the image
--
Soldier, Firefighter, Proud to be an American |
|
