wayjac
Premium,MVM
join:2001-12-22
Indy
 ·AT&T Midwest
| reply to jfeise
Re: [Modem] Motorola 2210 doesn't respond to ping
said by jfeise  :It didn't give the public IP address to the computer. It kept renewing the 192.168.1.64 address all the time. If you did a release....renew ip address on the computer after setting the modem to ip passthrough/dmz configuration....getting the private ip address is a problem
said by jfeise :While the bellsouth interface has more options, I didn't see anything ping or ICMP related. Yea.... I think its in there somewhere its just not obvious
said by jfeise :Looks like it fits my requirements then. I won't use the wireless, though, since I already have an internal wireless WPA setup. You should also consider a used speedstream 5100b, 4100 or 4100b dsl modem one may be a better fit |
|
jfeise
join:2009-03-27
Santa Ana, CA
| said by wayjac :You should also consider a used speedstream 5100b, 4100 or 4100b dsl modem one may be a better fit Well, I still have a Speedstream 4100. That started the whole issue, because the Speedstream doesn't let outbound tunneled IPv6 packets through. The Motorola does. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | Why is the ping so important to you |
|
jfeise
join:2009-03-27
Santa Ana, CA
| said by wayjac :Why is the ping so important to you That also has to do with IPv6. HE's IPv6 tunnelbroker (»www.tunnelbroker.net/) tries to ping the IPv4 address to verify the tunnel. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | So.....the speedstream 4100 only blocks outbound IPv6 packets
The motorola 2210 blocks icmp pings |
|
jfeise
join:2009-03-27
Santa Ana, CA
| said by wayjac :So.....the speedstream 4100 only blocks outbound IPv6 packets The motorola 2210 blocks icmp pings The Speedstream blocks outbound IPv6 packets encapsulated in IPv4. I didn't even try to send IPv6 directly...
But it let inbound tunneled IPv6 packets through, as tcpdump showed.
Another modem I tried was a D-Link 2320B. Ping worked, and it gave the WAN IP to the local computer, but with a DHCP lease renewal time of 15 seconds, not changeable of course...
All I need is a DSL modem that lets all packets through, and allows me to get the WAN IP address on the local computer, with a reasonable DHCP lease time.
Not too much to ask, I think  |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
·AT&T Midwest
| said by jfeise :Another modem I tried was a D-Link 2320B. Ping worked, and it gave the WAN IP to the local computer, but with a DHCP lease renewal time of 15 seconds, not changeable of course... A 15 second lease time means the client is always renewing the lease.........not a good thing
said by jfeise :All I need is a DSL modem that lets all packets through, and allows me to get the WAN IP address on the local computer, with a reasonable DHCP lease time. Not too much to ask, I think I hope you're able to find what you need |
|
