 wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | reply to jfeise
Re: [Modem] Motorola 2210 doesn't respond to ping So.....the speedstream 4100 only blocks outbound IPv6 packets
The motorola 2210 blocks icmp pings |
|
jfeise
join:2009-03-27
Santa Ana, CA | said by wayjac:So.....the speedstream 4100 only blocks outbound IPv6 packets The motorola 2210 blocks icmp pings The Speedstream blocks outbound IPv6 packets encapsulated in IPv4. I didn't even try to send IPv6 directly...
But it let inbound tunneled IPv6 packets through, as tcpdump showed.
Another modem I tried was a D-Link 2320B. Ping worked, and it gave the WAN IP to the local computer, but with a DHCP lease renewal time of 15 seconds, not changeable of course...
All I need is a DSL modem that lets all packets through, and allows me to get the WAN IP address on the local computer, with a reasonable DHCP lease time.
Not too much to ask, I think  |
|
wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | said by jfeise:Another modem I tried was a D-Link 2320B. Ping worked, and it gave the WAN IP to the local computer, but with a DHCP lease renewal time of 15 seconds, not changeable of course... A 15 second lease time means the client is always renewing the lease.........not a good thing
said by jfeise:All I need is a DSL modem that lets all packets through, and allows me to get the WAN IP address on the local computer, with a reasonable DHCP lease time. Not too much to ask, I think I hope you're able to find what you need |
|
