site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Uniqs:
2264
Share Topic
Posting?
Post a:
Post a:
Links: ·TekSavvy DSL Reviews ·TekSavvy Forum FAQ ·Speedtest results
page: 1 · 2
AuthorAll Replies

sMURF

join:2007-02-27
Toronto, ON

Bell finally fixed the IKNS remotes (somewhat)

And it only took them 19 months! Way to fail!

The upstream SNR/power are still stuck on 6dB/12.5dBm respectively, but the attenuation is no longer stuck on 20.5dB (it shows as 5.5dB for me).

It's also still on interleave, but the ping times are better. Before being put on the IKNS remote, my second hop ping times were usually 10ms or so, then around 45ms while on the IKNS remote, and now it's around 15-20ms.


Angelo
The Network Guy
Premium
join:2002-06-18

i'd check your profiel a change in profiles can do this


sMURF

join:2007-02-27
Toronto, ON

Profile is still the same:

Down Up
Current Rate: 5056 kbs 800 kbs
Max Rate: 10584 kbs 800 kbs
Current Connection:
Current Noise Margin: 25.0 dB 6.0 dB
Current Attenuation: 5.4 dB 5.5 dB
Current Output Power: 1.0 dBm 12.5 dBm


bbiab

join:2004-05-26

Not sure why you think your problems are due to IKNS. In fact, I don't think there ever was a problem with down, only the reporting of stats. Up, on the other hand, still no change @ 736 here. Some will say there is no reason for this or does not exist anymore, but then they never say how to fix. This is real of course, documented from the beginning. Ping is fine, no idea what the stats say, don't care.



Gokuu

join:2001-08-27

If you had bothered to read the OP, you would have realized that he was talking about UPSTREAM.

If you have no idea about the stats and "don't care", then please don't bother posting and wasting our time if you have nothing of value to add to the conversation.

I have been on an IKNS remote since March 2009, and I have always had correct upstream attenuation with my ST516. Upstream is at a perfect 800kbit, however this wasn't the case when on 2+. I was never able to get anything close to the 1088 which is in Bell's official profile.

said by bbiab:

Not sure why you think your problems are due to IKNS. In fact, I don't think there ever was a problem with down, only the reporting of stats. Up, on the other hand, still no change @ 736 here. Some will say there is no reason for this or does not exist anymore, but then they never say how to fix. This is real of course, documented from the beginning. Ping is fine, no idea what the stats say, don't care.

planiwa

join:2009-02-19
Toronto M5S

2 edits

reply to sMURF
This appears to have happened 22 hours ago:

SysUpTime: 18:14:43 xDSL linestate down
SysUpTime: 18:16:28 xDSL linestate up (downstream: 5056 kbit/s, upstream: 800 kbit/s; output Power Down: 17.0 dBm, Up: 12.5 dBm; line Attenuation Down: 17.0 dB, Up: 20.5 dB; snr Margin Down: 27.0 dB, Up: 6.0 dB)
SysUpTime: 01 day 16:39:00 LOGIN User logged in on TELNET (192.168.1.2)
Jun 25 07:48:07 LOGOUT User logged out on TELNET (192.168.1.2)
Jun 25 07:48:21 LOGIN User logged in on TELNET (192.168.1.2)
Jun 25 07:58:54 LOGOUT User logged out on TELNET (192.168.1.2)
Jun 25 08:05:23 LOGIN User logged in on TELNET (192.168.1.2)
Jun 24 08:07:23 LOGOUT User logged out on TELNET (192.168.1.2)
Jun 24 08:07:34 LOGIN User logged in on TELNET (192.168.1.2)
Jun 24 08:08:14 LOGOUT User logged out on TELNET (192.168.1.2)
Jun 24 08:10:41 LOGIN User logged in on TELNET (192.168.1.2)
Jun 24 08:18:23 LOGOUT User logged out on TELNET (192.168.1.2)
Jun 29 01:57:27 xDSL linestate down
Jun 29 02:08:35 xDSL linestate down
Jun 29 02:08:56 xDSL linestate up (downstream: 5056 kbit/s, upstream: 800 kbit/s; output Power Down: 5.0 dBm, Up: 12.5 dBm; line Attenuation Down: 5.0 dB, Up: 5.5 dB; snr Margin Down: 27.5 dB, Up: 6.0 dB)

Access Concentrator is bas3-toronto02 DSLAM is 501-4

Channel mode still reports Interleaved, and latency has not improved.
Mind you ST 516 is not vulnerable to IKNS latency as 2Wire is.

Any earlier log reports?
--
»[RFC] Connection / Speed Problems Checklist



Gokuu

join:2001-08-27

Interesting. Looks like they're pushing out new firmware.


donkies

join:2008-04-08

1 edit

reply to sMURF
here in Montreal too, was 20.5 now is 7.5 ala upload ATTN, still states interleaved.

speedstream 4200 would never sync at 800 up, where a 2wire 2700 does without issue.


sMURF

join:2007-02-27
Toronto, ON

reply to planiwa

said by planiwa:

This appears to have happened 22 hours ago:
Yeah that's when I lost my connection, June 30th around 1:57am, and it came back up at 2:25am. I only noticed the change while playing a game today, my ping was half of what it used to be.

I believe it was only the 2Wire modems that had significant ping time increases on IKNS remotes, other modems only had a 5-10ms increase.

I'm not sure if the new firmware on these remotes fixes the lower than normal upload profile some people seem to be stuck on, however.

planiwa

join:2009-02-19
Toronto M5S

Oh, now that you mention it -- mine happened 2 days ago!!!!


InvalidError

join:2008-02-03
kudos:5

reply to donkies

said by donkies:

here in Montreal too, was 20.5 now is 7.5 ala upload ATTN, still states interleaved.
My ADSL went down on Monday night too, Montreal, IKNS remote. My timeline was roughly like this:
01:30 - Loss of sync
01:45 - Sync is back but transport is down, unable connect to authentication servers
02:15 - Transport is back but login attempts always fail with "incorrect user name or password", even test@test
03:00 - Back online

I too noted the change in upstream attenuation but still bogus other stats.

bbiab

join:2004-05-26

1 edit

reply to Gokuu
OP be talking about interleave and ping time. Not using ST516.


bbiab

join:2004-05-26

reply to sMURF
The poster with the speedstream 4200 would never sync at 800 up. This seems to be a problem. Still. Perhaps this thread wasn't about that though, my mistake.



HiVolt
Premium
join:2000-12-28
Toronto, ON
kudos:12

Neither SpeedStream 4200 or 6520 (i tried both) sync at higher than 736/766 on an IKNS remote (on ADSL2+ profile).
--
GOLF LEAFS GOLF!


bbiab

join:2004-05-26

ADSL sync 736


oxfordwhite

join:2008-01-28

reply to sMURF
Well somethign did happen. My attenuation went from the 20.5 to varing between 8-15 depending on the resync. (upstream that is)



TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada

reply to sMURF
I had resycned on 30th as well. Not sure of changes.

But last night (july 4th) at 4am-7am I had lost sync. Attenuation is even lower at 6db and the snr is 0.5 HIGHER on upload! 6.5dB YUPIEEE...
To be fair everytime my modem resynced i'd get about 200-300
Transmitted FEC and Transmitted CRC. I have 0 now. So something has changed.



TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada

reply to sMURF
Did you guys notice INKS ADSL2+ Resync time is down from 2-3minutes to 15-20seconds !!!

Whatever they did on the update, it seems to have made a nice difference.
Anyone else care to try?


dpkform

join:2003-04-13
Toronto, ON

reply to sMURF
I'm on TMMB/IKNS in High Park, Toronto, and while my upload SNR remains at 6, my attenuation is 6.5 from what I believe was in the low 20s. My output power is showing at 12.5 - can't remember if this was different before.

Has made a small but significant difference on upload for me - I used to score in the low to mid 600 range, now I am pulling high 600 on java test, and low 700 on flash test to speedtest.teksavvy.com

Server latency seems kinda crappy though at about 137ms.


bbiab

join:2004-05-26

reply to sMURF
No change on ADSL upsync - still 736 on a perfect line.


Saturday, 02-Jun 06:36:48 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.
Most commented news this week
Hot Topics