| reply to smaye
Re: [Equipment] Rewired- No VOIP Phones! Try to disable the firewall on SBG900 first and see it that works. If it does, the problem would be that you need to setup port forwarding for SIP (port 5060) protocol.
As for UPLINk, it's typically used for connection to another switch (cascading). In the past, cascading requires a cross-over cable. With a dedicated uplink port, a straight-through cable is good enough. Also, nowadays, most switches can do auto-sensing and rarely a cross-over is needed. |
smaye
join:2005-12-11
Hendersonville, TN | Thanks for the info. I have found the firewall blocked most things. Once disabled many worked, but the VOIP was still no change.
I have also tried setting port forwarding exactly the same as I did successfully on the Linksys router. I think i am going to have to hang it up and go back to my previous setup. |
