pete89
join:2009-07-02
| 1800 Serial Interface Hello,
I have a 1841 running Version 12.4(13r)T. We contracted T1 and I get 1.5 down but only 370 uploads. here is some output:
NatChem1841#sh int ser0/0/0
Serial0/0/0 is up, line protocol is up
Hardware is GT96K with integrated T1 CSU/DSU
Description: $FW_OUTSIDE$
Internet address is 11.22.22.226/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 3/255, rxload 30/255
Encapsulation PPP, LCP Open
Listen: CDPCP
Open: IPCP, loopback not set
Keepalive set (10 sec)
Last input 00:00:08, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:58:34
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 12
Queueing strategy: weighted fair
Output queue: 0/1000/64/12 (size/max total/threshold/drops)
Conversations 0/34/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 183000 bits/sec, 18 packets/sec
5 minute output rate 21000 bits/sec, 14 packets/sec
104885 packets input, 100607458 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
77036 packets output, 13256210 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Does anyone see a problem here?
Thanks,
Pedro |
