tp0d
yabbazooie
Premium
join:2001-02-13
Carnegie, PA
clubs:
 ·Verizon FIOS
1 edit | reply to Tyreman
Re: ? Cleaning A-Coil
forgot to tell you how to open the plenum, doh!
There are slide fittings on the corners of the duct that should come off, or possibly compression fit joints that push together. These will come apart with a little time. Usually the coil is put in after the plenum is set on the furnace, or if you have a better A coil, some come preboxed, and there will be a few 1/4" screws to remove the front panel. If its 22yrs old, thats prolly not the case.
Definitely try to remove the panel with the coil protrusion before cutting. If you do the dremel method, you could cut thru a copper tube inside without knowing, and yer f*cked
-j
--
if it aint broke, tweak it!!
currently on FiOS (kick aZZ!) |
