Topic 'Re: Rate My Build. Making any mistakes?' in forum 'PC Hardware Discussion/Reviews' - dslreports.com http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22648774 en Sat, 11 Feb 2012 12:08:29 EDT Sat, 11 Feb 2012 12:08:29 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22675318 said by asdfdfdfdfdfdfdf :

Ideally you should use all 8 pins of the aux 12v connector.

If it is running stable you could just leave well enough alone. It should be ok.
I will plug it in on next reboot then. Thanks!
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22675318 Wed, 08 Jul 2009 17:47:02 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674767
If it is running stable you could just leave well enough alone. It should be ok.]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674767 Wed, 08 Jul 2009 16:13:24 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674600 said by Red Green:

Look at page 2-36 in your motherboard manual.
Yes I had read that, but it reads like bad stereo instructions to me. I am sorry for the noobie question. Do I connect just 1 or 2? I have a 650w power supply that has both plugs. Currently running just one of them.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674600 Wed, 08 Jul 2009 15:37:07 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674201 http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22674201 Wed, 08 Jul 2009 14:22:45 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22673001
Its running fine right now with one set plugged in.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22673001 Wed, 08 Jul 2009 11:41:32 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22671756
Still not sure ill try the raid out. Maybe on my next format.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22671756 Wed, 08 Jul 2009 08:03:23 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22670877 said by sdgthy :

said by Chillin:

Pros/Cons of each way?
Pro: Might be faster, depends on the controller.

Con: Double the likelihood a drive failure will take out the partition.
Yeah that is a con but with all of the drive space he has on other drives it only makes sense that he be running a back-up plan.

If I was running RAID I would always have a full back-up and keep it up to date weekly.
--
In need of a Vegas vacation.
]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22670877 Tue, 07 Jul 2009 23:25:19 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22670775 said by Chillin:

Pros/Cons of each way?
Pro: Might be faster, depends on the controller.

Con: Double the likelihood a drive failure will take out the partition.]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22670775 Tue, 07 Jul 2009 23:08:37 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22669066
You will need to setup your BIOS to show it which drives you are using as RAID and what configuration you are using RAID 0.
--
In need of a Vegas vacation.
]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22669066 Tue, 07 Jul 2009 17:14:33 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22665733 said by VegasMan:

said by Chillin:

said by jouno53:

If you haven't already RAID 0 the raptors and you're looking at some crazy speed.
Ive never played any with RAID... so probably above my head.

What kind of speed increase would I see? To late now to do it probably since computer is already done?
Speed on load will fly. It shouldn't be hard to do now just create an image of your current HD and then just setup the two raptors as raid and then flash the image on to them. Depending on how much space you system takes now shouldn't take more than an hour to do.
Sounds easy enough. One of the Raptors is already the OS drive.

How would I "flash the image" to the other one? Ghost? Then what? is this something set up in the bios or do I need a standalone controler or software or what? Pros/Cons of each way?
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22665733 Tue, 07 Jul 2009 08:12:01 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664348 said by VegasMan:

said by Chillin:

said by jouno53:

If you haven't already RAID 0 the raptors and you're looking at some crazy speed.
Ive never played any with RAID... so probably above my head.

What kind of speed increase would I see? To late now to do it probably since computer is already done?
Speed on load will fly. It shouldn't be hard to do now just create an image of your current HD and then just setup the two raptors as raid and then flash the image on to them. Depending on how much space you system takes now shouldn't take more than an hour to do.
^This - he explained it better than I could have
--
My Site -]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664348 Mon, 06 Jul 2009 22:04:13 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664331 said by Chillin:

said by jouno53:

If you haven't already RAID 0 the raptors and you're looking at some crazy speed.
Ive never played any with RAID... so probably above my head.

What kind of speed increase would I see? To late now to do it probably since computer is already done?
Speed on load will fly. It shouldn't be hard to do now just create an image of your current HD and then just setup the two raptors as raid and then flash the image on to them. Depending on how much space you system takes now shouldn't take more than an hour to do.
--
In need of a Vegas vacation.
]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664331 Mon, 06 Jul 2009 22:01:22 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664306 said by jouno53:

If you haven't already RAID 0 the raptors and you're looking at some crazy speed.
Ive never played any with RAID... so probably above my head.

What kind of speed increase would I see? To late now to do it probably since computer is already done?
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22664306 Mon, 06 Jul 2009 21:55:46 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22663748 --
My Site -]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22663748 Mon, 06 Jul 2009 20:23:37 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22661299 said by MnR:

Hi,

Nice build! But one question, Are you sure that you have enough fans..... :D LOL!!!!

MnR
HAHA thanks, no im not sure, I actually have a spot for 1 more 120 or 140mm fan. The case seems cool inside it. So I figure ill let it be.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22661299 Mon, 06 Jul 2009 13:28:36 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22661194
Nice build! But one question, Are you sure that you have enough fans..... :D LOL!!!!

MnR
--
No one is listening until you make a mistake!]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22661194 Mon, 06 Jul 2009 13:10:12 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22657210 Sounds like you are enjoying it.
Glad everything went smoothly.]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22657210 Sun, 05 Jul 2009 14:16:17 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22656897












Final Specs:
i7 920 Quad Core
Asus P6T V2 Motherboard
12gb 1333 DDR3 Ram (2gbx6)
2xDVD Supermulti drives
300gb WD Velociraptor 10,000 rpm HD (main OS and programs)
1tb WD Black 7,200 rpm HD (main data)
750gb WD 7,200 rpm HD (additional data)
1tb Maxtor One Touch (Data Backup)
Nvida EVGA GTS 250 1gb DDR3 Graphics Card
650w Power Supply
Cooler Master Case with 5 120mm fans, Nvida Edition.
30 inch Samsung 2560x1600
24 inch Dell 1920x1200
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22656897 Sun, 05 Jul 2009 12:16:04 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22653111 --
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22653111 Sat, 04 Jul 2009 09:00:36 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649902 said by asdfdfdfdfdfdf :

If this is what you are looking at:

»www.microcenter.com/single_produ···=0308440

yes the OCZ3P1333LV12GS should be ok. The 6GB kit version is also on the qualified vendor list for your motherboard so you should have good luck with the 12GB kit.
Yup, thats the one! Thanks. I am leaving in a couple hours to get all the parts. Hopefully it goes without a hitch. Looking forward to having a beast.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649902 Fri, 03 Jul 2009 13:45:25 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649787
»www.microcenter.com/single_produ···=0308440

yes the OCZ3P1333LV12GS should be ok. The 6GB kit version is also on the qualified vendor list for your motherboard so you should have good luck with the 12GB kit.]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649787 Fri, 03 Jul 2009 13:29:28 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649566 said by asdfdfdfdfdfdf :

It looks ok to me. I would check the ram product numbers against this link. I would confirm and use 1.65v modules. I would stay at 1.65v or below as intel specifies.

»www.ocztechnology.com/products/m···_edition
Here is what the Microcenter site says about the ram.

The OCZ PC3-10666 triple-channel memory kit is designed specifically for the Intel® Core™ i7 processor / Intel® X58 Express Chipset. Optimized for the Core i7's triple channel mode, these new 3GB, 6GB, and 12GB kits ensure optimal performance via an ideal combination of low voltage requirements, speed, and latency. Developed for enthusiasts and early-adopters, the low voltage OCZ Triple Channel solutions are the choice counterparts for leading-edge performance that won't inhibit the functionality of Core i7 CPUs. In addition, modules are tested in matched triplets ensuring superior compatibility.

I guess that means im ok?
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649566 Fri, 03 Jul 2009 12:23:20 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649351
»www.ocztechnology.com/products/m···_edition]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22649351 Fri, 03 Jul 2009 11:40:38 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22648869 said by CCat:

I can't comment on the build, but the case is the same one as I have. I like the case. Just one tip for you.
On the front of the case where the HDD cooling fan is (mine is led blue) there is a fine screen behind the outer mesh covering the fan.
This will get dusty enough to start blocking the air flow going over the HDD's. Keep an eye on the HDD temps.
You wont see the dust buildup just by looking at the front of the case.
The bottom of the front panel just pulls straight out (a bit stubborn but it does come off) and the front comes off. Just a quick vacuum on the screens, pop the front back on and your good to go.
Thanks for the heads up!
--
Graphic Disorder]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22648869 Fri, 03 Jul 2009 09:29:20 EDT Re: Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22648844 On the front of the case where the HDD cooling fan is (mine is led blue) there is a fine screen behind the outer mesh covering the fan.
This will get dusty enough to start blocking the air flow going over the HDD's. Keep an eye on the HDD temps.
You wont see the dust buildup just by looking at the front of the case.
The bottom of the front panel just pulls straight out (a bit stubborn but it does come off) and the front comes off. Just a quick vacuum on the screens, pop the front back on and your good to go.
--
Sometimes My Mind Wanders.....Other Times It Leaves Completely!]]> http://www.dslreports.com/forum/Re-Rate-My-Build-Making-any-mistakes-22648844 Fri, 03 Jul 2009 09:20:55 EDT Rate My Build. Making any mistakes? http://www.dslreports.com/forum/Rate-My-Build-Making-any-mistakes-22648774
Mobo: Asus P6T Deluxe V2
Proc: i7 920
Ram: OCZ Platinum XTC 12gb DDR3 1333
Video: EVGA e-Geforce GTS 250 1gb DDR3
Case: Cooler Master CM 690
Power Supply: Corsair TX 650
Drives: 2 x Samsung 22x DVD Burners
HD: 1tb 7200 WD Black (for data)

Getting the parts at microcenter. Price: 1293.10 out the door.

I have monitors and these hard drives will also be going in it:
2 x 300gb 10krpm Velociraptors (one for OS/programs drive and not sure what ill use the second for)
750gb 7200rpm WD (data)
1tb 7200 Maxtor External (data back up)

Monitors:
Samsung 30 inch 2560x1600
Dell 24 inch 1920x1200

What you guys think? Think she will scream along? I am a Graphic Designer so thats why I have the huge amount of ram and fast drives and drive space and large monitors.
--
Graphic Disorder]]> http://www.dslreports.com/forum/Rate-My-Build-Making-any-mistakes-22648774 Fri, 03 Jul 2009 08:48:20 EDT