TomS_
debugger it
Premium,MVM
join:2002-07-19
Australia
| reply to CraigSPL
Re: [Config] Accessing Services Behind CISCO 2811 Router
It is possible that your ISP doesnt allow you to host a "web server" so they block incomming connections to port 80.
Try changing your port forward as follows:
This will allow you to connect to your router IP/dyndns hostname on port 8000, and the connection will be redirected to your server/PC on port 80.
Also note that you cannot test this configuration from within your network, you must test it from out on the Internet, a rather annoying feature of Cisco routers. |
|
CraigSPL
join:2006-02-26
Durham, NC
| I have tried every configuration I have been able to find but I am still unable to access internal web services from outside. I need to access my Dynamics interface away from the office. My configuration is below. I am able to get to the router from outside but thats it. I disabled the firewall on the host computer and I removed the firewall entries on the router. Please Help
Building configuration...
Current configuration : 5200 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ROUTER!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
no logging buffered
enable secret XXXXXXXXX
enable password XXXXXXXX
!
aaa new-model
!
!
aaa authentication login local_authen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authentication login sdm_vpn_xauth_ml_2 local
aaa authorization exec local_author local
aaa authorization network sdm_vpn_group_ml_1 local
aaa authorization network sdm_vpn_group_ml_2 local
!
!
aaa session-id common
memory-size iomem 15
!
!
crypto pki trustpoint TP-self-signed-899310478
crypto pki certificate chain TP-self-signed-899310478
dot11 syslog
no ip source-route
!
!
ip cef
no ip dhcp use vrf connected
!
ip dhcp pool sdm-pool1
network 10.100.100.0 255.255.255.0
dns-server
default-router 10.100.100.1
netbios-name-server 4.2.2.66
!
!
ip name-server 4.2.2.5
ip name-server 4.2.2.6
ip ddns update method dyndns
HTTP
add »XXXXXXXX:XXXXXXXX%40members.dynd···yip=BVI1
interval maximum 1 0 0 0
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
voice-card 0
!
!
!
username XXXXXXXXXl privilege 15 secret 5 $1$Di0I$F/rXXnVI7M2w3X4dYNF.V0
username XXXXXXXXXXXXX privilege 15 secret 5 $1$BTyS$lOw/KH9Q.b4MYcYkCYAq0.
!
!
!
!
crypto dynamic-map SDM_DYNMAP_1 1
reverse-route
!
!
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
!
archive
log config
hidekeys
!
!
!
class-map type inspect match-any SDM-Voice
match protocol h323
!
bridge irb
!
!
!
!
interface FastEthernet0/0
description $ETH-LAN$$FW_INSIDE$
ip address 10.90.90.90 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
duplex full
speed auto
no mop enabled
!
interface FastEthernet0/1
description $ETH-LAN$$FW_DMZ$
ip address 10.100.100.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
duplex auto
speed auto
!
interface Serial0/0/0
no ip address
no ip route-cache cef
no ip route-cache
shutdown
!
interface ATM0/1/0
mac-address XXXX.XXXX.XXXX
no ip address
no ip route-cache cef
no ip route-cache
no atm ilmi-keepalive
bundle-enable
hold-queue 208 in
!
interface ATM0/1/0.35 point-to-point
no ip route-cache
bridge-group 1
pvc 0/35
encapsulation aal5snap
!
!
interface BVI1
description $FW_OUTSIDE$
ip ddns update hostname anydomain.dyndns.org
ip ddns update dyndns
ip address dhcp
ip nat outside
ip virtual-reassembly
!
no ip forward-protocol nd
no ip http server
ip http secure-server
!
!
ip dns server
ip nat inside source static tcp 10.100.100.48 80 interface BVI1 80
ip nat inside source list 1 interface BVI1 overload
ip nat inside source list 3 interface BVI1 overload
ip nat inside source list 10 interface BVI1 overload
!
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.100.100.0 0.0.0.255
access-list 2 remark SDM_ACL Category=16
access-list 2 permit 10.90.90.0 0.0.0.255
access-list 10 remark Local IP addresses for the dynamic PAT with the BVI1 interface IP address
access-list 10 permit 10.10.32.0 0.0.0.255
no cdp run
!
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
!
!
mgcp fax t38 ecm
!
!
!
! |
|
