viperm
Carpe Diem
Premium
join:2002-07-09
Winchester, CA
1 edit | reply to Killa200
Re: RouterOS Questions
Are you going to give out public or private ip addresses to the laptops associating to the aps etc?
First things first you need to get the WAN workign first to make things easier.
I assume your going to use interface 1 on the Mikrotik for WAN?
If so plug eth port 1 into your CIsco. Log into the Mikrotik with Winbox to make things easy.
Assign a PUBLIC ip address to your ether 1 interface from winbox make sure you put it in as this form xxx.xxx.xxx.xxx/24 or whatever your netblock of ip's are comign from your CIsco.
Then go into Ip/routes and add a route destination of 0.0.0.0/0 gateway being yoru cisco lan IP thats connected to the Mikrotik eth one so if mikrotik ethernet1 is configured with ip address 208.79.10.2 then your gateway on the cisco would be 208.79.10.1 Obviosly these ip's I just made up but you get my drift.
Get that far and see if you can go to tools in winbox and choose ping and see if you can ping an IP address on the net.. |
