Killa200
Premium
join:2005-12-02
Spring City, TN
 ·AT&T Southeast
| ive managed to get the entire thing patched up as follows:
Running 2 sets of dhcp /24 blocks on Mikrotik 1, 1 assigned to 2.4ghz, another to 5.8ghz. A masquerade rule for the /16 that those two dhcp allotments fall under. Then Mikrotik 2 has the 5.8ghz card running in station-pseudobridge mode, and that card plus the 2.4ghz card are in a bridge so that Mikrotik 2 can get assign cpe's dhcp addresses from the 1st mikrotik as well as pass traffic.
All addresses are private except for the 1st mikrotik which has a public ip address bound between Ethernet 1 and the cisco.
Feel free to comment on a better way... this is just what i managed to get working between google, viperm's comments, and fiddling around myself. |
