Topic '[XP] cannot execute after connecting' in forum 'Networking' - dslreports.com http://www.dslreports.com/forum/XP-cannot-execute-after-connecting-22662989 en Fri, 10 Feb 2012 02:38:38 EDT Fri, 10 Feb 2012 02:38:38 EDT Re: [XP] cannot execute after connecting http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22665467 i closed zonealarm firewall and everything got ok... ?!?!]]> http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22665467 Tue, 07 Jul 2009 04:06:59 EDT Re: [XP] cannot execute after connecting http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22665461 when I try to run anything ,nothing happens.. without any error messages

my adsl modem is a modem\router and i configured it as bridge and i connect trough a PPPoE connection. so i can disconnect it in windows.

and my adsl provider is not a well-known company.]]> http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22665461 Tue, 07 Jul 2009 03:52:38 EDT Re: [XP] cannot execute after connecting http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22663347
Installing dialup networking should have no effect on ADSL.

said by maximate:

when I first connected to the internet behind zonealarm firewall os couldn't execute anything again... There was no ip conflict error but just after I disconnect it (explorer runs ok) all tasks run, and the problem goes away.
What do you mean "O/S couldn't execute anything?" Was there some sort of error message? What do you mean "after I disconnect it?" What is it?

When you say ADSL modem is this just a dumb modem or modem/router? What type of ADSL do you have? Static IP, DHCP, PPPoE or very rare PPPoA? Most ADSL uses PPPoE which requires entering a username/passphase. The reason for the questions is to determine if router or PC is responsible for managing DSL connection.

From your description it is possible you have a PCI card ADSL modem rather then an external device? That is pretty rare now a days.

Who is your DSL provider? There are company specific forums for many of the larger ISPs.

/tom]]> http://www.dslreports.com/forum/Re-XP-cannot-execute-after-connecting-22663347 Mon, 06 Jul 2009 19:15:53 EDT [XP] cannot execute after connecting http://www.dslreports.com/forum/XP-cannot-execute-after-connecting-22662989 I am running a Windows XP SP3 , ZoneAlarm Free Firwall , AVG Free Antivirus and I connect to the internet via broadband wan connection and an adsl modem.
I think my problem started when my ISP service went down and I tried to install my dial-up modem driver. Well it installed successfully but when I tried to connect trough it, an error came that that my device has an internal problem or sth and it didn't connect.
But when my adsl service got ok, and I connected trough it after several hours I received an ip conflict error, even if I was offline. And when I connected to the internet my OS couldn't execute anything, even taskmgr !
I unistalled my modem, restored os several times to several checkpoints, scaned my computer but nothing worked.
So I formated my drive C and installed a fresh copy of Windows XP SP3 and removed my internal dial-up modem from motherboard .
But when I first connected to the internet behind zonealarm firewall os couldn't execute anything again... There was no ip conflict error but just after I disconnect it (explorer runs ok) all tasks run, and the problem goes away.]]> http://www.dslreports.com/forum/XP-cannot-execute-after-connecting-22662989 Mon, 06 Jul 2009 18:12:24 EDT